Content SPECIFICATION/ACCESSORIES ................................1 WARNING............................2 INSTALLATION..........................4 PANELS..............................5 REMOTE CONTROL........................6 BASIC OPERATION.........................7 FM OPERATION..........................8 BLUETOOTH OPERATION......................9 AUDIO OPERATION........................10 USB OPERATION..........................11 TROUBLE SHOOTING........................12 IMPORTANT INFORMATION......................13...
Page 3
Specification Power supply AC 220V-240V~50Hz Max. power consumption Input jacks Aux in, USB Frequency 87.5MHz-108.0MHz Audio output 2x15W+30W RMS (10%THD) Bluetooth effective distance 10 meters in open air CSR 2.1 +EDR Bluetooth edition Operating conditions Temperature : 5 C~35 C (Max.75%RH) Installation : on a flat horizontal surface Accessories DISPLAY...
Warning 1. Read these Instructions - All the safety and operating instructions should be read before this product is operated. 2. Keep these Instructions - The safety and operating instructions should be retained for future reference. 3. Heed all Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4.
Page 5
Safety Instructions Please read and understand all the warnings provided below, as well as and those marked on the unit. This unit has been designed and manufactured to assure personal safety. Only use power source that is specified Keep the unit and power plug in the User Manual or on the system.
Panel Controls PANELS USB PORT PREVIOUS STANDBY FAST FORWARD FAST REWIND NEXT STOP VOLUME -/+ PLAY/PAUSE SOURCE AUDIO INPUT L/R AUDIO IN SOCKET FM ANTENNA AUDIO IN AUDIO IN...
Remote control 1. Align the remote control directly at the remote control sensor of the device. 2. The range of the remote control depends on the charge of the battery. 3. Bright light (sun or artificial light) should not fall directly at the remote control sensor.
Basic Operation PREPARATION 1) Before the unit is turned on, please check if all the connections are right and safe. Then connect the main power. 2) Press the POWER ON/OFF button on the back panel to turn on the main power. 3) Press the STANDBY button to turn on the unit or to the standby mode.
FM operation The range of FM frequency is from 87.50MHz to 108.00MHz. 2. Press SOURCE button or FM button to enter FM mode. 3. Extend the antenna as far as it can to get the best reception. Vary the antenna direction to find the strongest signal for each station.
Bluetooth operation BLUETOOTH PAIRING 1. Put the Bluetooth device (e.g. smart phone) within the 10m Bluetooth search range. Then turn on the Bluetooth function on the phone. 2. Press BLUETOOTH button on remote or press SOURCE button on the panel to enter Bluetooth mode.
Audio operation Before connecting with the music devices, pay attention to the picture below. 1. Each connection must be safe and firm. Disconnect the power cable before you have finished all the connections. 2. The unit can connect with the DVD player/MP3 player/Smart phone/Computer or other music device via a audio cable.
USB connection USB OPERATION 1. Insert USB stick to the USB port to connect with this unit. 2. Press SOURCE button or USB button to enter USB mode. 3. Once the unit detects the USB stick, it starts playing music automatically. 4.
Trouble shooting For your convenience, we have listed some methods to solve common problems you may encounter when you use the system. If the problem occurs repeatedly, contact the nearest maintenance center. Power supply can not be turned on * Make sure that the power cord is fully inserted in the power outlet. The remote control does not work * Battery is used up * The front end of the remote control is not aimed at the infrared reception part of the...
Important information Waste Electrical and Electronic Equipment Directive The European directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), requires that old household electrical appliances must not be disposed of in the normal unsorted municipal waste stream. Correct disposal of this product Old appliances must be collected separately in order to optimize the recovery and recycling of the materials they contain, and reduce the impact on human health and the environment.
Need help?
Do you have a question about the GDTSPK02BLK and is the answer not in the manual?
Questions and answers