Table of Contents
Advertisement
MASSAGE CHAIR OPERATION
Controller Operation
Power Button
•
Press to turn on the unit.
The display screen will light up.
Press the Up or Down key to highlight your
preferred massage mode and preference.Press
[
•
Press [Power button] again to turn off all functions.
The default running time is 15 minutes for each
Menu Button
•
During any massage operation, press here to:
1.
2.
massage program
Shoulder Position Adjustment keys
•
While the Point mode manual program in running,
use these keys to adjust your desired position of
the point massage.
Auto mode button
•
Press this button to bring up the chair's six auto-
matic massage programs.
Direction dial
•
After pressing the Menu or Auto mode buttons, use
the Up, Down, Left, or Right direction keys to move
among selections. Then press the center OK key to
confirm that selection.
Heat button
•
Press this key to start the heat function. A
corresponding light will illuminate.
•
Press this key again to turn off the heat function.
Airbag button
•
To adjust your airbag massage location and
pressure, first press this button. Then use the Up,
Down, Left, or Right arrow keys to specify your
massage location and adjust your desired pressure.
] to select.
Select and switch to a direct massage function
Add or end an option to run with your current
6
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the LEGACY DWA-9100 and is the answer not in the manual?
Questions and answers
Rollers squealing during operation. Back rollers uneven
If the rollers on the Daiwa LEGACY DWA-9100 are squealing or uneven, check for any obstructions between the massage rollers and the leather cover. Remove any debris or objects that may be causing the issue. If the problem persists, contact the manufacturer for maintenance and repair. Do not attempt to dismantle or repair the chair yourself.
This answer is automatically generated
My massage chair stopped working and got stuck in a reclined position
The Daiwa LEGACY DWA-9100 massage chair may have stopped working and become stuck in a reclined position due to one or more of the following reasons:
1. The power plug may have slipped out of the wall outlet — ensure it is securely connected.
2. The power switch may be in the "off" position — switch it to "on".
3. The fuse may have blown — replace it with another fuse of the same type.
If these steps do not resolve the issue, power off the chair, unplug it, and contact the manufacturer for maintenance. Do not attempt to repair it yourself.
This answer is automatically generated
Can you please send me someone to fix my massage chair