Banner VE200G1A Instruction Manual page 65

Sensitivity
Set the Sensitivity to define how sensitive the sensor is to finding blemish or other edges within the ROI. The sensitivity
value helps account for light variations that can affect how well the sensor detects edges on inspected parts.
The Sensitivity scale is from 0 to 100 where 0 means least sensitive and 100 means most sensitive. If set near 0, the
sensor finds very sharp edges with strong contrast. If set near 100, the sensor finds very dim or blurry edges, and may be
unstable. The default is 80.
Edge Length Range
Shows the different contiguous edge segments found.
Use the sliders to specify the edge length range in pixels. Edges found within this range will be considered when
calculating the Pass Count. Green represents lengths within the specified range and yellow represents lengths outside of
the specified range.
Image Overlays
Chose whether to display or hide the annotations, ROI, or masks when this tool is not selected. Masks are hidden by
default.
These options override the ROI view buttons
specific tool is selected, the ROI information is shown.
Hide Annotations
Hides the annotations on the live image for the tool, even when the tool is selected.
Figure 98. Show Blemish Tool Annotations
Hide ROI
Hides the ROI when the tool is not selected.
Figure 95. Sensitivity
Figure 96. Edge Length Range
Figure 97. Image Overlays—Default
on the Image Pane Parameters when no tool is selected. When a
www.bannerengineering.com - Tel: 763.544.3164
VE Series Smart Camera
Figure 99. Hide Blemish Tool Annotations
65