NEC NEFAX 671 Service Manual page 311

Direct Fax Sending (Gateway TX)
No. Condition
1 Data does not
arrive at the copier.
2 A fax cannot be
sent from this
copier.
PageScope Light
No. Condition
1 A connection with
PageScope Light
cannot be estab-
lished.
2 Could not login
using Administra-
tor mode.
3 The text in the
window is disorga-
nized.
4 Some deleted
characters remain
in the window.
Cause
The Unimessage Pro I-
Net Portal settings are
incorrect.
Since the size of the
received data is large, it
cannot be received due to
the server's limitations.
The communication mode
for gateway transmissions
is incorrectly specified.
Cause
The IP address for the
device is not specified
correctly.
The URL setting in the
Web browser is incorrect.
The settings in the Web
browser are incorrect.
If a proxy is specified with
the browser and the IP
address of this copier
cannot be recognized by
the proxy server, the Pag-
eScope Light window
cannot be displayed.
The LAN cable is dam-
aged.
Before this login, a differ-
ent user name and pass-
word had been entered.
The browser is too small. Increase the size of the browser.
An appropriate font size is
not selected.
Operations differ depend-
ing on the browser used.
T-49
Action
Check the Unimessage Pro I-Net
Portal settings.
Reduce the size of the data, for
example, by decreasing the number
of pages, and then try sending
again.
The "GATEWAY TX" parameter
must be set to "ENABLE", and the
communication mode must be set
correctly.
Action
Specify the IP address.
In the "Address" box, type the IP
address of the specified device.
Even though the device can be
accessed, certain settings must be
specified according to the network
configuration in order to establish a
connection. For details, contact
your network administrator.
Use the proxy settings in the
browser to add the IP address of
this copier to the list of exceptions
that will not use the proxy server.
Replace the LAN cable.
Once login is successful, that user
name and password is saved in the
browser until the browser is closed.
Close the browser, and then start it
up again.
Specify an appropriate font size for
the computer and browser.
Reload the browser window or res-
can.