Warning on invasion of privacy..........4 What’s Included..............5 T16 Diagram ................. 6 Before Using Your Conbrov T16 Camera......7-10 How to Use Your Conbrov T16 Camera ......11-12 Turning the Camera On/Off ..........11 2. How to Record A Video or Take A Photo......11 3.
Part 1 Before First Use Charging the camera Before the first use, charge the camera for about 20 minutes via your PC or USB charger (Power adapter should be no more than 5V/1A). Yellow indicator Yellow indicator Formatting the microSD Before the first use, format the microSD to FAT32 format.
Part 2 Quick Guide A.Install the microSD Card B.Turn On/Off lights up blue and the camera is in standby mode. flashes alternating red and blue and then turns off. D.Play The Video C.Record A Video 3S power off Record a Video flash 3 times blue USB2.0 For more detailed information, see Part 3: Detailed User Manual.
Safety precautions • Read this instruction manual carefully before using the camera. It contains important information for your safety as well as operating and maintenance instructions. • Follow all safety precautions in order to prevent damage due to improper use of the camera. •...
Warning on invasion of privacy The camera should be used for legal purpose only. Follow the laws of your country. Recording and circulating an image of an individual may constitute an infringement of their privacy for which you could be liable. Ask for authorization before filming individuals, particularly if you want to keep your recordings and/or circulate images on the Internet or any other medium.
Before Using Your Conbrov T16 Camera 1.Charging your camera Yellow indicator Fully charged Steady yellow Charging Fully charged Low power Flashing blue and red (1) Charge the camera for about 20 minutes via your PC or USB charger 5V/1A. (2) Connect the supplied USB cable to the Micro USB port and a suitable USB port on your PC or a USB charger (separate charger not included).
Page 10
Before Using Your Conbrov T16 Camera 2.Installing the microSD Installing the microSD card Removing the microSD card Caution! Format the microSD before use. Doing this, however, will remove all data from the card. Make sure to back up any data before formatting.
Before Using Your Conbrov T16 Camera (2) Do not connect or remove the microSD during operation, this will damage both card and camera. (3) Do not force the microSD into the microSD slot, this will damage both card and camera. It only goes in one way.
Page 12
Before Using Your Conbrov T16 Camera After setting date and time, click on “File” and then on “Save”. SETTIME.TXT File Edit Format View Help Open Save Save as Page settings Print Exit Note: If you cannot find the file SETTIME.TXT after opening the microSD on the computer, please record a video clip to activate the card and set the date and time again.
How to Use Your Conbrov T16 Camera 1. Turning the Camera On/Off (1) Press and hold the to switch the camera on. The LED will light up blue, which indicates that it is in standby mode. (1) Press and hold the to switch the camera off.
5. How to Play a Video Or Check a Photo Connect the T16 camera to computer, press and hold the for more than 3 seconds or take out the microSD, insert it into the card reader (included), then connect the card reader to computer.
Other Tips 1. How to Reset the Camera Use the supplied pin or similar tool (like a paperclip) to reset your camera in case of a malfunction. Press and hold the Reset Button for several seconds to reset the camera to standard factory settings. 2.
LED status Operation LED status indication LED lights up yellow and turns Charging via 1A USB adapter off once fully charged. LED flashes blue for 10 seconds, No microSD card connected and the camera turns off. Blue LED turns off (camera turns No operation for 60 seconds off).
Technical specifications Dimensions 25x27x20 mm Net weight 16 g Battery capacity 170 mAh Sound-activation sensitivity 60 dB Camera angle 75° Night vision range Sound standby time 60 minutes Day recording power consumption Day continuous recording time 45 minutes Night recording power consumption 1.5 W Night continuous recording time 35 minutes...
FAQs 1.Q: Why is the camera charging so slowly? A: The charging current is too low. Charge with 5V/1A. 2.Q: The camera connected to PC cannot be read. A: Reset the camera as described in Chapter “Resetting the camera”. A: Check the USB port of the computer for correct connection and damages. A: Check the USB cable for damages.
Warranty All products sold by the Conbrov Group are covered by a 12-month full replacement warranty. Happy with it? Share your experience with an Amazon review. Or any questions? Our friendly customer services team are ready to help: support@conbrov.com Contacting us via the above email address is the quickest way to reach our support team.
Page 20
All trademarks or registered trademarks are the property of their respective owners. About Us Conbrov Electron Co., Ltd. founded in 2003 is an innovative technology research company specialized in personal surveillance cameras and on-dash cameras. Conbrov products and technology are patent protected by PCT or U.S.
Need help?
Do you have a question about the T16 and is the answer not in the manual?
Questions and answers