Table of Contents
Advertisement
Quick Links
WARNING: SmartWitness installations should be performed by a qualified individual or
installation professional only. Working with a vehicle's power system can be dangerous to
both you and your vehicle. This installation is intended only to be a guide since vehicle
designs and power/input sources can vary significantly from vehicle to vehicle.
If you need to schedule a professional installation service in the USA for your SmartWitness
device(s), please visit
http://smartwitness.com/scheduleinstall
SmartWitness CP1
Installation Guide
v.1.3
Model #'s:
• CP1
(AT&T, T-Mobile, N. & S. America HSPA networks)
• CP1-VZ
(Verizon)
• CP1-SP
(Sprint)
www.smartwitness.com
and submit the online form.
Advertisement
Table of Contents
Related Manuals for Smart Witness CP1
Summary of Contents for Smart Witness CP1
- Page 1 SmartWitness CP1 Installation Guide v.1.3 Model #’s: • CP1 (AT&T, T-Mobile, N. & S. America HSPA networks) • CP1-VZ (Verizon) • CP1-SP (Sprint) WARNING: SmartWitness installations should be performed by a qualified individual or installation professional only. Working with a vehicle's power system can be dangerous to both you and your vehicle.
- Page 2 Conflicting Reports of Actual Events, Driving Offence Allegations (speeding, traffic signal violations, swerving, etc.). When a 3G SIM card is inserted, CP1 is able to send video and driving data via a cellular network (T-Mobile or AT&T in USA, Bell or Rogers in Canada). North...
-
Page 3: Package Contents
Adhesive (2ea) *Depending on the order, the SD Card and Sim card may not be included or they may be in a separate package from the CP1 (common in large, bulk orders). CP1-SP & CP1-VZ do not use a SIM. www.smartwitness.com... - Page 4 CP1 Structure: Windshield Bracket (GPS/GLONASS module inside) Camera Lens Power Cable lead (3 ft) G-Sensor Calibration button Panic / SOS button 3G Network LED (Green) Record Status LED (Blue) www.smartwitness.com...
-
Page 5: Installation: First Steps
“unlocked position” Then insert the provided Sim card into the second, smaller slot as seen below: *Verizon (CP1-VZ) and Sprint (CP1-SP) versions do not utilize SIM cards. The CP1 MEID # must be provided to Verizon and Sprint for activation. - Page 6 (see the image below). The bracket can be adjusted up or down based on specific slope of the vehicle’s windshield: Secure the CP1 to the windscreen behind the rear view mirror, below the AS1 line. The camera lens should be as high on the windshield as possible, but still within the windshield wiper zone. If installing KP1S into a truck, FMCSA mandates that the camera portion of the device should reside in the top 2 inches of the vehicle wiper sweep.
- Page 7 Once the CP1 is secured to the windshield the user must attach the security seal sticker for angle lock for more protection at the backside of the camera as follows: Note: If the security sticker is removed, it will reveal “VOID / OPEN” text, indicating the camera angle may have been tampered with (see below picture for example).
-
Page 8: Cp1 Power Adaptor And Wiring
CP1 Power Adaptor and Wiring: To connect the CP1 lead cable to the INT1S power adaptor, lining up the arrows on the silver cable connectors and then push together. Twist the silver plate as shown below to secure the connection. -
Page 9: Final Steps
Final Steps After installation of the CP1 into the vehicle, you can turn on vehicle ignition and the camera will power on. There will be a sequence of BLUE/GREEN LED lights cycling during boot process. Once boot up is complete. There will be a solid blue light. This means proper operation and recording. -
Page 10: Led Reference Table
LED Reference Table Record Communication Condition Audible Alarm (Blue) (Green) Parking Step1 Start Step2 ON and OFF Start complete 「beep」(1 time) shutdown shutdown ON and OFF quickly Continuous Record Recording stand by Event Record ON and Recording OFF quickly Record Continuous Recording Dual Record...
Need help?
Do you have a question about the CP1 and is the answer not in the manual?
Questions and answers