Table of Contents
Advertisement
Apply the following instructions
Step
Mounting Procedure For Frame Sizes 4 and 5
Apply the following instructions
Step
60
Action
4
Attach the drive on the mounting surface using the screws with captive washer, according to the
table above.
5
Refit the top cover on the drive.
6
Refit the top cover to help prevent metal parts to fall into the drive during wiring operation or if
IP21 degree of protection is requested.
Action
1
Unscrew the 6 screws (frame size 4) or the 8 screws (frame size 5) attaching the front and bottom
covers
2
Remove the covers
EAV64301 01/2015
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the ATV630 and is the answer not in the manual?
Questions and answers