USBMIC1 User Manual Cardioid Condenser USB Microphone Contents Preliminary setup with Mac OS X Preliminary setup with Windows XP Preliminary setup with Windows Vista Preliminary setup with Windows 7/10 Additional Information Specifications & Technical Assistance...
Preliminary setup with Mac OS X 1. Plug the free end of the provided USB cable into the USB port on your computer. Your computer will automatically recognize the USB device and install a driver. System Preferences. Note: Many recording software programs are available online. Audacity is widely used free software for recording and editing sounds.
Page 3
Sound preference pane. 4. Click the Input tab and select the USBMIC1 as the device for sound input. USBMIC1 Your preferences are now set to use the USBMIC1 on your Mac with GarageBand or another recording program of your choice.
2. In the lower right portion of your screen you may see a message that new hardware was found; or you may see a driver software installation notice. Start 3. To select the USBMIC1 as your default recording device, begin at your menu. Select Control Panel.
Page 5
Preliminary setup with Windows XP (continued) 4. Select Sounds and Audio Devices...
Page 6
Sound recording Default device. USBMIC1 7. Through the Wave In window, you can set the computer volume or mute the microphone. USBMIC1 Your preferences are now set to use the USBMIC1 with Windows XP with the recording program of your choice.
(You should see a green check mark beside the USB microphone icon.) Microphone SigmaTel C-Major Audio Working Microphone USBMIC1 Mic Working Your preferences are now set to use the USBMIC1 with Windows Vista with the recording program of your choice.
2. In the lower right portion of your screen you may get a message that new hardware was found; or you may see a driver software installation notice. Start menu > Control Panel > Sound To select the USBMIC1 as your default recording device, begin at your Start menu. Select Control Panel...
Page 9
Preliminary setup with Windows 7/10 (continued) 4. Select Sound The following screen will pop up:...
Page 10
(loudness). You may need to come back to this window to readjust the level after you begin recording. Your preferences are now set to use the USBMIC1 with Windows 7/10 with the recording program of your choice.
(or other sound source) to achieve the best frequency response of the microphone. This requires the user to speak into the microphone with the Stadium logo positioned towards the mouth. As this microphone is directional. The distance from the mouth should be about 1 inch, or 10 - 40mm for optimal recording.
0˚ LEGEND 12" or more on axis Technical Assistance: 330˚ 30˚ 60˚ 300˚ If you need assistance setting up or using your Stadium product now or in the future, call Stadium Support. 90˚ 270˚ Australia 120˚ 240˚ LEGEND 200 Hz 150˚...
Need help?
Do you have a question about the USBMIC1 and is the answer not in the manual?
Questions and answers