Toshiba Q9 Installation And Operation Manual page 181

F917
Output Function Assigned
Program  My Function Unit 3
This parameter plays a role in the setup of the My Function feature by selecting
the functionality of the Output Function Assigned terminal.
This setting assigns the function of the programmable Output Function Assigned
data location to 1 of the functions listed in the Input Setting field of
pg. 190.
Settings:
0 – 3099
See the My Function Instruction Manual (P/N E6581335) and
information on this parameter.
My Function Percent Data 1
Program  My Function Data
This parameter is used to set the trigger threshold level of the analog signal of the
My Function Percent Data 1.
The analog signal is selected using the Input Setting number from
190.
Once the assigned output value reaches the threshold setting of this parameter the
output value is transferred to My Function Out 1.
See the My Function Instruction Manual (P/N E6581335) and
information on this parameter.
My Function Percent Data 2
Program  My Function Data
This parameter is used to set the trigger threshold level of the analog signal of the
My Function Percent Data 2.
The analog signal is selected using the Input Setting number from
190.
My Function Percent Data 3
Program  My Function Data
This parameter is used to set the trigger threshold level of the analog signal of the
My Function Percent Data 3.
The analog signal is selected using the Input Setting number from
190.
My Function Percent Data 4
Program  My Function Data
This parameter is used to set the trigger threshold level of the analog signal of the
My Function Percent Data 4.
The analog signal is selected using the Input Setting number from
190.
Q9 ASD Installation and Operation Manual
Direct Access Number — F917
Parameter Type — Selection List
Factory Default — 0 (Disabled)
Changeable During Run — Yes
Table 7 on
F977 for more
Direct Access Number — F918
Parameter Type — Numerical
Factory Default — 0.00
Changeable During Run — Yes
Minimum — 0.00
Table 7 on pg.
Maximum — 200.00
Units — %
F977 for more
Direct Access Number — F919
Parameter Type — Numerical
Factory Default — 0.00
Changeable During Run — Yes
Minimum — 0.00
Table 7 on pg.
Maximum — 200.00
Units — %
Direct Access Number — F920
Parameter Type — Numerical
Factory Default — 0.00
Changeable During Run — Yes
Minimum — 0.00
Table 7 on pg.
Maximum — 200.00
Units — %
Direct Access Number — F921
Parameter Type — Numerical
Factory Default — 0.00
Changeable During Run — Yes
Minimum — 0.00
Table 7 on pg.
Maximum — 200.00
Units — %
F921
171