Controlling The Charger Using The App - Skyrc D100 Instruction Manual

Controlling the Charger Using the App

The Bluetooth 4.0 connectivity allows the user to control and monitor the D100v
comfortably through an app on a portable device such as smart phone, iPad, or iPhone.
The iOS app can be downloaded from iTunes store, the Android app from Google Play
Store. Operation of the app is self-explanatory and the same on iOS
and on Android. Explicit pairing is not required; after download and
installation just activate Bluetooth on your mobile device and launch
the App. D100v and your device will establish Bluetooth connection
2
automatically.
Scan the QR code on the right to download the SkyCHARGER
App.
OPERATION
Connect the power cord to D100v
1.
(100~240V AC, 50/60Hz).
Connect the batteries to the corresponding channels.
2.
Enable Bluetooth function on your mobile device and launch the SkyCHARGER.
3.
1). Launch the App and set the password (Please do not set the password to 5793
which is the reserved for the system using)
Revo 15:53
Ver: 1.7.1
SkyCHARGER
D100v
2
, then plug the power cord into the outlet
2
Revo 15:53
CH. A CH. B
Battery Battery
Operation
Type Cells
Mode
4
5
Alert
6
LiPo BAL.CHARGE
Please setup your password
LiIon CHARGER
Ignore OK
LiFe DISCHARGER
NEXT
SCAN TO GO
HOME PROGRAM
Scan with
your
to download.
Revo
BACK
Your password must have at least 4 digits
主页
SYSTEM
2
Smartphone
15:53
Edit Password
OK
编程 系统
31 ·