Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for ION Explorer Outback
Summary of Contents for ION Explorer Outback
- Page 1 English ( 2 – 6 ) Quickstart Guide English ( 7 ) Appendix...
- Page 2 Repair If the battery fails to charge, check your fuse near the power cable input. If your fuse is intact and it still will not charge, contact ION Audio at ionaudio.com. Disposal Bring the unit to a recycling center or dispose of in accordance with local...
-
Page 3: Quick Setup
Please do not place Explorer Outback in standing water. • Please do not connect the power cable to Explorer Outback in a wet environment. Make sure the power input, power cable, and power outlet are all completely dry before making any connections. - Page 4 Beat Sync: The lights react to the beat of the music. • Off: The lights turn off. This is the default mode when Explorer Outback is first powered 4. Radio Selector: This button sets the Radio to AM, FM, or turns the radio off.
- Page 5 12. Speaker Link: Connect two or more Explorer Outbacks together using a 1/8” (3.5 mm) stereo aux cable from the Speaker Link of one Explorer Outback to the Aux Input of the second Explorer Outback. A 2’ (61 cm) cable is included but a longer one can be purchased from a local electronics retailer.
-
Page 6: Troubleshooting
Troubleshooting If the sound is distorted: Try lowering the volume control of your sound source, musical instrument, or microphone. Also, try to reduce the overall volume of Explorer Outback using the Master Volume knob. If there is too much bass: Try adjusting the tone or EQ control on your sound source to lower the bass level. -
Page 7: Technical Specifications
** Battery life may vary based on temperature, age, and volume usage of product. Trademarks & Licenses ION Audio is a trademark of ION Audio, LLC, registered in the U.S. and other countries. The Bluetooth word mark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by ION Audio is under license. - Page 8 ionaudio.com Manual Version 1.2...
Need help?
Do you have a question about the Explorer Outback and is the answer not in the manual?
Questions and answers
I have an explorer outback 2. My problem is the column on the speaker is not turning up. There is no sound on the min but when you turn it up to max you can barely hear it. Can you tell me how to fix it?
If the sound is distorted, try lowering the volume control of your sound source, musical instrument, or microphone. Also, reduce the overall volume using the Master Volume knob. If you can’t hear the microphone over the music, turn down the music volume from your source.
This answer is automatically generated