Returning To Default Settings; Printing From A Digital Camera - Epson PictureMate Pal User Manual

3. Press to increase the contrast of the screen or
press
OK
4. Press
Cancel

Returning to Default Settings

You can return your settings to the PictureMate Pal original default settings.
1. Press
Menu
2. Press or
You see a confirmation message.
3. Press
OK
changing the settings.

Printing From a Digital Camera

You can connect a digital camera that supports PictBridge or USB DIRECT-PRINT
printing to PictureMate Pal and use the camera to control printing. (Check your
camera manual to see if it supports PictBridge or USB DIRECT-PRINT. A cable may
not be included with your camera.)
1. Make sure PictureMate Pal is on but not printing.
2. Make sure there are no memory cards in PictureMate Pal's slots.
Note: If a memory card is inserted, the printer will read photos from the card, not
from a camera.
3. Turn on your camera.
40
.
to exit.
.
to highlight
Reset Defaults
to return to the original settings, or press
to reduce the contrast. Then
and press .
OK
to exit without
Cancel