SX20 codec. We • Video conference room acoustics guidelines • PrecisionHD Camera 1080p12x do not recommend using the Precision 40 and PrecisionHD • Getting started guide for the TelePresence systems • Precision 40 Camera (PrecisionHD Camera 1080p4x S2) 1080p2.5x cameras with C series codecs.
Camera control is used for controlling the pan, tilt and zoom, Power supply Kensington lock and for powering up the camera. Power • When the camera is used with a Cisco codec, power is Extra camera out and Camera control HDMI Video HD-SDI Ethernet supplied through the Camera control cable.
Kensington lock Power • When the camera is used with a Cisco codec, power is supplied through the Camera control cable. • When the camera is used with non-Cisco codecs, you HDMI Video...
Physical interface Connecting the camera Daisy chaining Video output format Appendices Precision 40 Camera* Only available as a part of th Cisco TelePresence SX20 Quick Set. Spare PID: CTS-PHD1080P4XS2= HDMI and camera control Video Out • HDMI is the video out source.
Connecting the camera Daisy chaining Video output format Appendices PrecisionHD Camera 1080p2.5x HDMI Video out, Only available as a part of the Cisco TelePresence SX20 Quick camera control and Power supply Set. power Spare PID: CTS-PHD-2.5X= The camera can be mounted on a screen with the camera bracket that is part of the SX20 Quick Set bundle, or it can stand on an even surface.
Camera control is used for controlling the pan, tilt and zoom, and for powering up the camera. Power • When the camera is used with a Cisco codec, power is supplied through Camera control cable. • When the camera is used with non-Cisco codecs, you may have to connect power separately.
Pin out — Custom plug camera cable The custom cable is used when connecting a SX20 codec to a PrecisionHD Camera Custom plug Custom plug 1080p2.5x or Precision 40 Camera (Formerly PrecisionHD Camera 1080p4x S2). Pin# Pin# Signal name Part number: CAB-HDMI-PHD4XS2...
All of the RS–232 parameters except speed are fixed the PrecisionHD 1080p4x, PrecisionHD 1080p2.5x and and not user configurable. The speed may be changed Precision 40 cameras. These commands are marked with by issuing the Speed command defined on the following (asterisk) throughout this section.
Terminator byte (1) longer than 16 bytes through Sony cameras. all 1’s, i.e. decimal 255 (or hexadecimal FF). The easiest way to avoid this is to put the Cisco See the illustration for details. cameras first in the chain. Commands and replies that are longer than 16 bytes are marked on the following pages.
Daisy chaining Video output format Appendices Appendices VISCA™/RS–232 control protocol, continued NOTE: Some VISCA™ commands do not apply to the PrecisionHD 1080p4x, PrecisionHD 1080p2.5x and Precision 40 cameras. Network and interface commands Camera commands Command set Command packet Comments Command...
Connecting the camera Daisy chaining Video output format Appendices Appendices VISCA™/RS–232 control protocol, continued NOTE: Some VISCA™ commands do not apply to the PrecisionHD 1080p4x, PrecisionHD 1080p2.5x and Precision 40 cameras. Camera commands, continued... Command Command Packet Comments Command Command Packet...
Daisy chaining Video output format Appendices Appendices VISCA™/RS–232 control protocol, continued NOTE: Some VISCA™ commands do not apply to the PrecisionHD 1080p4x, PrecisionHD 1080p2.5x and Precision 40 cameras. PTZF - movement commands, continued... Command Command Packet Comments Command Command Packet...
Connecting the camera Daisy chaining Video output format Appendices Appendices VISCA™/RS–232 control protocol, continued NOTE: Some VISCA™ commands do not apply to the PrecisionHD 1080p4x, PrecisionHD 1080p2.5x and Precision 40 cameras. Inquiries Command Command Packet Response Command Command Packet Response...
= 16 bit packet id, pp=LSB bytes data] rrss = 16 bit CRC, rr=LSB * Does not apply to PrecisionHD 1080p4x, PrecisionHD 1080p2.5x and Precision 40 cameras Returns y0 50 ff if packet ok. -> send next one. Other commands Returns y0 60 09 ff if crc error ->...
Need help?
Do you have a question about the Precision 40 and is the answer not in the manual?
Questions and answers