PIAGGIO MP3 500 i.e. SPORT Service Station Manual page 243

MP3 500 i.e. SPORT Business_LT_ ABS-ASR_EU_USA (2015)
- Check the rotor axial clearance using a rectified
bar as reference plane, as shown in the figure.
Characteristic
Limit value allowed:
0.1 mm
Refitting
- Make sure the gasket is in the correct position.
N.B.
THE TOOTH OF THE GASKET MUST BE IN ITS SEAT.
- Lubricate the internal rotors.
- Check there are no signs of scoring or wear on
the oil pump cover.
- If non-conforming values or signs of wear are
found, replace the pump.
- Fit the pump cover in the position that permits the
crankcase fixing screws to be aligned.
- Tighten the two fastening screws to the prescri-
bed torque.
Locking torques (N*m)
Oil pump cover screws
- Insert the oil pump with gear
- Insert the 2 retaining screws through the slots on the gear and tighten to the prescribed torque.
N.B.
THE ASSEMBLY POSITION OF THE PUMP IS FIXED BY INSTALLATION OF THE SCREWS.
0.7 ÷ 0.9
Engine
ENG - 243