Appendix 3 Frequently -Asked Questions - Datavideo SE-500HD Instruction Manual

Appendix 3
This section describes problems that you may encounter while using SE-500HD. If you have any
questions, please refer to related sections and follow all suggested solutions. If problem still exists,
please contact your distributor or the service center.
No. Problems
1. Audio is switched only after the
transition is complete.
2.
Jitter is seen on moving images.
Frequently-Asked Questions
Solutions
It is normal that audio is switched after the
transition is complete regardless of the transition
method (T-Bar or Auto) used.
Please make sure the input and output are set to
the same resolution and frame rate.
27