ABC PROIZVOD CONCEPT 2 MINI Technical Instructions

Central heating cookers

Hide thumbs Also See for CONCEPT 2 MINI:

Technical manual (40 pages)

Table Of Contents

Need help?

Do you have a question about the CONCEPT 2 MINI and is the answer not in the manual?

Questions and answers

Robert

February 19, 2025

Regarding the ABC Concept Mini: What is the minimum allowable distance to a wall insulated with mineral board & porcelain tile?

Summary of Contents for ABC PROIZVOD CONCEPT 2 MINI

Page 1 TECHNICAL INSTRUCTIONS FOR CONCEPT 2 AND CONCEPT 2 MINI CENTRAL HEATING COOKERS...
Page 2: Table Of Contents
We would like to thank you for your trust and to congratulate you since by this purchase you have become a member of voluminous family of satisfied buyers of company ABC PROIZVOD. We anticipate that soon you will be sure that you selected a quality and economic product, being a result of longstanding tradition of our company in the manufacture of central heating boilers and cookers.
Page 3: Cooker Intended Use And Specific Features
1. INTEDED USE AND SPECIFIC FEATURES OF CENTRAL HEATING COOKER These cookers are intended for heating of premises via central heating utility as well as food boiling and roasting, by solid fuel feeding (coal or dry wood). Besides that, it looks like a fireplace owing to fire-resistant glass on the firebox door.The cooker may be connected to a utility with either open or close pressure maintenance system, with water temperature up to 90°C and max.
Page 4: Description And Technical Characteristics
By the point of chimney connection, the cooker may be either left- or right-sided (lateral connection) or with hob connection. Concept 2 mini cookers are universal, left- or right-sided with the connection to the hob allowed. Before connecting the cooker to the chimney, one needs to remove sheet metal from lateral panel, detach protective sheet metal from the smoke tube (either on the left or on the right side, depending on the side you selected for connection to chimney), F.2,...
Page 5 14. Supply line R1" 15. Connector R1/2" for safety valve 16. Returning line R1 " 17. Load and unload connector R1/2" Technical details for all cooker types Concept 2 Concept 2 Mini TECHNICAL DETAILS Power transferred to water(kW)* Coal Wood Coal...
Page 6: Transportation And Storage
Picture number 2: CENTRAL HEATING COOKER - Concept 2 mini 1. Firebox door 2. Thermometer for water within the cooker б. Ashtray door 7. Ash ejector 8. Drought controller 12-12: Connector R1/2" for heat exchanger (thermal protection) 13. Connector R1/2"for thermal valve 14.
Page 7: Lnstallation
5. PLACEMENT / INSTALLATION Design, placement and central heating installation is mandatory to be done by a qualified person. In case of poorly designed system and possible defects in installation by mentioned person, which in turn may cause incorrect cooker functionality, solely the installer of heating system, not the manufacturer, representative or retailer of the cooker, bears both complete material responsibility and unexpected expenses.
Page 8 Picture 3 Connection to chimney Correct cooker connection to chimney Incorrect cooker connection to chimney Sealed Pipe Cleaning Cleaning hole hole sealed Sealed Sealed Cleaning hole Cleaning sealed hole Sealed Pipe Cleaning Cleaning hole hole sealed Picture 4. Chimney installation above the roof and chimney cap placement Putting a chimney above roof Chimney hat...
Page 9 5.3.INSTALLATION Central heating cooker may be connected to open system (F. 5) and to closed system (F. б) of central heating utility, since the cooker has built-in thermal safety feature – a heat exchanger. Thermal valve is not delivered with the cooker. Preferably connect the cooker to open central heating system, and connection of a thermal valve with a probe to the cooker is however mandatory as well as connection of the heat exchanger to water supply network.
Page 10: Operation-Fuel Feeding
Picture number 6 Scheme of the cooker connection to closed central heating 1. Cooker Concept 2 10. Safety valve 2. Smoke tube 11. Thermal valve 3. Valve 12. Water supply connection line 4. Closed expansion vessel 12'. Hot water drain 5.
Page 11 IIMPORTANT NOTE: First fuel feeding may cause condensation – water drops and humidity in the ashtray. In this case, increase the cooker temperature gradually and this phenomenon will disappear. 6.2. OPERATION The cooker is fed with fuel as all the other continuously burning solid fuel boilers. The fire is started with the ashtray door open.
Page 12: Troubleshooting
с) as a consequence of incorrect operation, user's failure to comply with a correct mode, heating and maintenance of the cooker – in that case, study this manual and take correct steps. If the problem persists, the user should refer to factory "ABC PROIZVOD" for a piece of advice/intervention.
Page 13: Disassembly And Disposal
Picture number 7 Panel disassembly for cleaning soot below the oven Plating The place Carrier where to put a screwdriver Detail A Screwdriver for removal of plating The opening, pos. 10' , F. 7 is designed for cleaning the soot below the oven. The panel is fastened to a clip and is easily removed by a lever principle (f.e.
Page 14: Addition
93/ 68/ EEC - Heaters for hot water ACCORDANCE WITH INTERNATIONAL STANDARDS The company “ABC PROIZVOD” in 2007 introduced a quality management system JUS ISO 9001/2008, which is maintained and improved. Since 2013, two additional standards were introduced. SRPS OHSAS 18001/2008 and SRPS ISO 14001/2005, so the company possesses an INTEGRATED QUALITY MANAGEMENT SYSTEM which is certified by an accredited body.
Page 15: Warranty
WARRANTY Company “ABC PRODUCT” is giving guarantee for its products as per guarantee given when the products get sold. Dear customers, in case you are not satisfied with our product, please check the following before you decide to get in touch with us: 1.

This manual is also suitable for:

Concept 2