Advertisement
Polk Audio XM Reference Tuner - XRt12
Table of Contents:
I.
Antenna Installation Options ...........................................2-3
II.
IR Codes & Remote Control ............................................4 -5
III.
12 Volt Trigger ...........................................................6
IV.
RS-232 Programming Codes ............................................7-9
V.
Firmware updates ......................................................... 10
This guide is provided as an aid to custom installation and home automation
professionals who are integrating the Polk Audio XM Reference Tuner into an
automated entertainment system. No other use of the information provided in this
document is authorized.
Polk Audio XRt12 CI Guide
Revision 3.0
Custom Installation Guide
Page 1
1/19/05
Advertisement
Table of Contents
Related Manuals for Polk Audio XRt12
Summary of Contents for Polk Audio XRt12
-
Page 1: Table Of Contents
Firmware updates ………………………………………………... 10 This guide is provided as an aid to custom installation and home automation professionals who are integrating the Polk Audio XM Reference Tuner into an automated entertainment system. No other use of the information provided in this document is authorized. -
Page 2: Antenna Installation Options
Reference Tuner are specifically chosen and attached at the factory to ensure that they will work with XM’s unique frequency band. Your High- Gain Home Antenna comes with 20-feet of cable. If that is not sufficient Polk Audio XRt12 CI Guide Page 2 1/19/05... - Page 3 Please contact us if this is a requirement for your installation. D. Antenna Splitters: With the use of the Terk XM-SP you can connect two XRt12 units to a single antenna cable. Terk XM-SP Polk Audio XRt12 CI Guide...
-
Page 4: Ir Codes & Remote Control
Remote Controls: The IR codes for the XRt12 are RC5x which includes a toggle bit as part of the code. As a result, a single press of a key will send out a toggle bit of 0 + the IR code, the second press of the same button will send out a toggle bit of 1+ the IR code. - Page 5 Press the desired feature key on XRt12 remote d) If confirm process is requested – go to step 3 3) When a confirm key press is requested – point the XRt12 remote away from the learning remote and press the desired feature key ONCE. Then, return the XRt12 remote back to the proper positioning for the learning remote and continue the confirmation process.
-
Page 6: 12 Volt Trigger
Reference Tuner's 12V Trigger Input jack on the rear panel. So long as the XM Tuner stays plugged into an active AC outlet, your XM Reference Tuner is ready to respond to power mode changes sent from your preamp or receiver. Polk Audio XRt12 CI Guide Page 6 1/19/05... -
Page 7: Rs-232 Programming Codes
The RS-232 port allows communication with the XRt12. All commands that are present on the front panel or the remote control of the XRt12 are available via the RS-232 port. In addition, the display data that is shown on the LCD display (or video output) is available over the RS-232 port. - Page 8 All of the commands are case sensitive and end by the “return” key. Command Parameter Description System Response ConnectXRt12 Connects the controller to the XRt12 None DisconnectXRt12 Disconnects the controller from the XRt12 None ChannelSelect Channel number Selects the channel. The number is always None three-digits (max.
- Page 9 When an unrecognizable command is entered, the system will respond with: Invalid Command (+ return command) When an unrecognizable parameter is entered, the system will respond with: Invalid Parameter (+ return command) Polk Audio XRt12 CI Guide Page 9 1/19/05 Revision 3.0...
-
Page 10: Firmware Updates
• A Windows 9x/NT/2000/XP PC with a DB9 COM port • A DB9 female-to-female 1:1 cable • The Polk Audio XRt12 XM Reference Tuner + Remote Control Software: • You need to download the free software (AVR Studio 4.10, build 356 or later) from the ATMEL website.
Need help?
Do you have a question about the XRt12 and is the answer not in the manual?
Questions and answers