Table of Contents
Advertisement
Specifications
SPECIFICATIONS
GENERAL SPECIFICATIONS AND FEATURES
3-½ digit LCD display (maximum reading of 2000); 3 LEDs;
green, yellow and red
Auto Range (ACV, DCV, Ohm, AC mA, and DC mA)
Automatic negative (-) polarity indication
Automatic zero adjustment
Over range indicator (except 10 A function). Displays "OL" on
LCD
Low battery indicator. Displays battery symbol on LCD
Automatic power shut off (after 15 idle minutes)
Pollution Degree 2
Measuring circuit category II
Operating environment:
Temperature - 32° to 104° F. (0° C to 40° C)
Humidity - Less than 80% relative humidity (non-condensing)
Altitude - up to 6562 ft (2000 meters)
Storage environment:
Temperature - 4° to 140° F (- 20° to 60° C)
Humidity - Less than 90% relative humidity (non-condensing)
Power Supply: Two 1.5V AA batteries
Fuse: 315mA/250V 5X20 mm (Radio Shack, GMA/217 series;
#270-1046) fuse
Dimensions:
Height - 5.50 in. (139 mm)
Width - 3.50 in. (89 mm)
Depth - 1.25 in. (32 mm)
Weight (including batteries): approximately 6.3 oz (180 g)
12
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the 3320 and is the answer not in the manual?
Questions and answers
Trying to check alternator voltage
To check alternator voltage with the Innova 3320 digital multimeter:
1. Set the Selector Switch to the DC voltage (DCV) position.
2. Connect the black (COM) lead to a good ground point on the vehicle (e.g., engine block or vehicle frame).
3. Connect the red lead to the output terminal on the back of the alternator.
4. Start the engine and observe the voltage reading.
5. A healthy alternator typically shows around 13.8 to 14.5 volts.
6. If voltage is low (around 12.2 volts) or shows little increase from battery voltage, check for a bad ground connection or a faulty alternator.
This answer is automatically generated