Vcom Adjustment (Hfr-Auo/Fxc Panel); Rec Setting - Sony KDL-32W700B Service Manual

Service Adjustment

4-8. VCOM Adjustment (HFR-AUO/FXC Panel)

4-8-1. STEP1
1. in "VPC" service mode
a.
VPC SERVICE
002 002 VCOM VCOM
b.
000 ENABLE 0
c.
4-8-2. STEP2
2. in "VPC" service mode (There is no OSD.)
a.
b. b.
VPC VPC SERVICE SERVICE
002 VCOM
001 ADJUST 64
c.
d.
e. e.
f.

4 9 REC Setting

4-9. REC Setting
4-9-1. STEP1
DIGITAL (DIG_SRV_MODE)
REC_SETTING
* 1 Key Copy
2 HDD Re-Register
1. in "Digital" service mode
a.Select "003 DIG_SRV_MODE" category by pressing "2 / 5" on remote.
b. Select "006 REC_SETTING " item by pressing "1 / 4" on remote.
c. Press "0" or "10" to go to detailed REC Setting screen.
Select "002 VCOM" category by pressing "2 /
5" on remote.
Select "000 ENABLE" item by pressing "1 / 4"
on remote..
Change ENABLE from "0" to "1" by pressing
"3" to enable VCOM adjustment.
-
The Picture is change Vcom Pattern and you
can't see OSD
Select "002 VCOM" category by pressing
"2 / 5" on remote.
Select 001 ADJUST item by pressing 1 / Select "001 ADJUST" item by pressing "1 /
4" on remote.
Change data by pressing "3 / 6" on remote.
Finish the adjustment when the picture
seems OK.
Select 000 ENABLE item by pressing 1 / Select "000 ENABLE" item by pressing "1 /
4" on remote.
Change ENABLE from "1" to "0" by
pressing "6" to disable VCOM adjustment.
and you can see OSD.
SERVICE
W800B/ W805B/ W807B/ W808B/ W815B/ W817B/ W828B/ W829A
4-9-2. STEP2
2. in detailed REC setting screen
a. Press "1" to select "Key Copy" item
b. b. Press Enter or 12 twice to execute the command. Press "Enter" or "12" twice to execute the command.
c. If OK, show the message "Key Copy OK". If NG, show the message
"Key Copy NG (= xx )".
d. Press "Return" to return to previous page.
DIGITAL (DIG_SRV_MODE) SERVICE
REC SETTING REC_SETTING
* 1 Key Copy
2 HDD Re-Register
Key Copy OK
xx value representation
0 copy success
1 decrypt error
2 file acquisition error
3 other
4-9-3. STEP3
3. in detailed REC setting screen
a a. Press 2 to select HDD Re Register Item. Press "2" to select "HDD Re-Register" Item
b. Press "Enter" or "12" twice to execute the command.
c. If OK, xx= x+1. If NG, xx=x.
d. Press "Return" to return to previous page.
DIGITAL (DIG_SRV_MODE) SERVICE
REC_SETTING
1 Key Copy
* 2 HDD Re-Register
(x) HDDs OK ( xx )
RB2G CHASSIS
W700B/ W705B/ W706B/ W707B/ W708B/ W790B
W855B/ W857B
DIGITAL (DIG_SRV_MODE) SERVICE
REC SETTING REC_SETTING
* 1 Key Copy
2 HDD Re-Register
Key Copy NG ( xx )
xx value representation
0 register success
1 HDD repetition
2 file acquisition error
3 3 HDD info miss-match HDD info miss-match
4 other
33