PER-EKO type KSW & KSW PLUS – Instruction Manual TABLE OF CONTENTS INTRODUCTION ………………………………………………………………………………………..………..1. GENERAL INFORMATION …...…………………………………………………..…………………………… 1.1. Application …………………………………………………………………………………………….……. 1.2. Fuel …………………………………………………………………………………...…………………….. 1.3. Dimensions & technical parameters. ……………………………………………………...…….…………... … 2. BOILER TECHNICAL SPECIFICATION …………………………………………...…………………………... 2.1. Water main body ……………………………………………………………………………………………..
1. 2 Fuel The basic fuel used with the KSW & KSW PLUS boilers is coal of the following granulation: 20÷40 mm or 40÷60 mm, with a fuel value of about 25 MJ/kg. The substitute fuel is a mixture of coke (type OI or OII) and coal type 32.1, range nut coal class II 24/12, according to norm PN-82/C-97001-3 and a proportion of both fuels 1:1 or 2:1.
PER-EKO type KSW & KSW PLUS – Instruction Manual wood, etc.), can also be used with KSW and KSW PLUS boilers. However, burning wood negatively affects the lifespan of the boiler as well as its efficiency. Continuous use of wood as the main fuel leads to soot accumulation and water condensation in the boiler and the chimney system, which results in symptoms similar to a leak.
PER-EKO type KSW & KSW PLUS – Instruction Manual 2.2.2 Loading door The loading door is used to fill the hearth chamber with coal and to clean the heatable surfaces of the boiler. The door is equipped with a recurring air throttle* and an upper incandescent plate which protects the door against excessive overheating.
Page 6
PER-EKO type KSW & KSW PLUS – Instruction Manual...
Boiler temperature controller is a standard feature of the KSW PLUS type. The controller’s instruction manual is enclosed separately. The boiler’s equipment includes: bimetallic thermometer 0-120˚C, release tap G1/2”, brush, hook, ash shovel and ash remover.
Boilers type KSW PLUS are adapted to operate together with the circulation pump. 4.3.1 Information on terms and conditions enclosed in the PN-91/B-02413 norm ...
The burning process in the KSW boiler can be regulated manually by changing the location of the throttle in the lower door by means of a regulated screw, or automatically, by means of an automatic draught regulator.
PER-EKO type KSW & KSW PLUS – Instruction Manual the sides of the boiler. During a long-term use this can result in corrosion which decreases the lifespan of the boiler. Therefore, it is recommended to use the boiler above the temperature of 60˚C. This can be achieved by: ...
5.6 Transportation instruction The KSW boilers are delivered in a fully assembled state. The furnace lever is fixed in a transportation-adapted position. For the transportation purposes, the boiler is placed on a wooden pallet and secured with plastic wrap.
The warranty period for welded connections is: 10 years from the production date for the KSW boilers and 5 years from the production date for the KSW PLUS boilers .
Need help?
Do you have a question about the KSW and is the answer not in the manual?
Questions and answers