Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Acer K650i SERIES
Summary of Contents for Acer K650i SERIES
- Page 1 Acer Projector K650i/L450R/LK-820F/Q1P1503 Series User's Guide...
- Page 2 Serial number: ___________________________________ Date of purchase: ________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
- Page 3 Information for Your Safety and Comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners.
- Page 4 • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices.
- Page 5 Product servicing Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified service personnel. Unplug this product from the wall outlet and refer servicing to qualified service personnel when: •...
- Page 6 • Locations where the altitudes are higher than 10000 feet. • Unplug immediately if there is something wrong with your projector. Do not operate if smoke, strange noise or odor comes out of your projector. It might cause fire or electric shock. In this case, unplug immediately and contact your dealer.
- Page 7 Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please recycle. For more information on the Waste from Electrical and Electronics Equipment (WEEE) regulations, visit http://www.acer-group.com/public/ Sustainability/index.htm...
-
Page 8: Precautions
viii First Thing First Usage Notes • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. -
Page 9: Table Of Contents
Information for Your Safety and Comfort First Thing First viii Usage Notes viii Precautions viii Introduction Product Features Package Overview Projector Overview Projector Outlook Control Panel Remote Control Layout MHL Feature Introduction Getting Started Connecting the Projector Turning the Projector On/Off Turning On the Projector Turning Off the Projector Adjusting the Projected Image... - Page 10 LED & Alarm Definition Listing Using the inner connector(s) Specifications Compatibility Modes Regulations and safety notices...
-
Page 11: Introduction
Compact size projector facilitates business purposes and home entertainment • Versatile display modes enable optimum performance in any situation • Acer EcoProjection Technology delivers Intelligent power management approach and physical efficiency improvement • Advanced keystone correction delivers optimum presentations •... -
Page 12: Package Overview
This projector comes with all the items shown below. Check to make sure you have them all. Contact your dealer immediately if any thing is missing. Projector Power cord VGA cable Acer Projector Multi-media (CD-ROM) User’s guide (CD-ROM) Quick start guide Remote control... -
Page 13: Projector Overview
Projector Overview Projector Outlook Front/upper side Description Description Remote control receiver Focus ring Tilt adjusting wheel Ambient light sensor Projection lens Control panel Speakers Power button Rear side Description Description Power socket LAN (RJ45 port for 10/100M Ethernet) Audio output connector Audio input connector USB-A (DC 5V output) HDMI (MHL) connector... -
Page 14: Control Panel
Control Panel Function Description TEMP Temp Indicator LED. LAMP Lamp Indicator LED. POWER indicator LED Refer to the "Turning the Projector On/Off" section. Power key Volume Increases/decreases the volume. ENTER Confirms your selection. BACK Cancels your selection, or goes back to previous page. -
Page 15: Remote Control Layout
Remote Control Layout Function Description Infrared Sends signals to the projector. transmitter POWER Refer to the "Turning the Projector On/Off" section. Favorite Press to open the LumiSense+, DTS Sound and Resync menus. ENTER Confirms your selection. Four Selects items or makes adjustments to your selection. directional selection keys... -
Page 16: Mhl Feature Introduction
Function Description 13 Volume UP Increases the volume. 14 Volume Down Decreases the volume. MHL Feature Introduction When your smart device is connected to the projector, you can use some buttons on the remote control to control your smart device. Press "MODE" for one second to enter or leave the MHL control mode. -
Page 17: Getting Started
Getting Started Connecting the Projector RS232 DVD player, Set-top box, Speakers HDTV receiver Smart device SD card Description Description 1 Power cord 6 RJ45 cable 2 VGA cable 7 SD card 3 Audio cable 8 USB flash drive 4 RS232 cable 9 WirelessHD dongle 5 HDMI (MHL) cable 10 Wireless dongle... - Page 18 please make sure the timing of the display mode is compatible with the projector. Note: Some smart devices require a converter (supplied by the smart device maker) to enable the MHL function. Note: Compatible HDMI/MHL dongles: WirelessHD (MWIHD1), MWA3, Android (MWND1), Chromecast...
-
Page 19: Turning The Projector On/Off
Turning the Projector On/Off Turning On the Projector Ensure that the power cord and signal cable are securely connected. The Power LED will light red. Turn on the projector by pressing (POWER) on the control panel or remote control, and the Power indicator LED will turn blue. See "User Controls"... -
Page 20: Turning Off The Projector
Turning Off the Projector To turn the projector off, press the power button. This message appears: "Please press power button again to complete the shutdown process" Press the power button again. The LED Power indicator will turn solid red to indicate standby mode. It is now safe to unplug the power cord. -
Page 21: Adjusting The Projected Image
Adjusting the Projected Image Adjusting the Height of the Projected Image The projector is equipped with two elevator feet for adjusting the image height. To raise the image: Use the front Tilt adjusting wheel to raise the image to the desired height and angle. -
Page 22: How To Optimize Image Size And Distance
How to Optimize Image Size and Distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. If the projector is 3 m from the screen, good image quality is possible for image sizes around 122". -
Page 23: How To Get A Preferred Image Size By Adjusting Distance And Zoom
How to Get a Preferred Image Size by Adjusting Distance and Zoom The table below shows how to achieve a desired image size by adjusting either the position or the zoom ring. To obtain an image size of 70" set the projector at a distance 1.7 m from the screen. -
Page 24: User Controls
See Acer Projector Multi-media (CD-ROM) for details. • USB connection: accesses the internal memory. See Acer Projector Multi- media (CD-ROM) for details. • VGA: chooses RGB or component video source input via the VGA IN connector. -
Page 25: Onscreen Display (Osd) Menus
Onscreen Display (OSD) Menus The projector has multilingual Onscreen Display (OSD) menus that allow you to make image adjustments and change a variety of settings. Using the OSD menus • To open the OSD menu, press "SETTING" on the control panel or remote control. -
Page 26: Color
Color The light sensor of LumiSense+ technology can intelligently optimizes the brightness and color saturation of projected image based on actual ambient light. The feature greatly enhances dark detail visibility and color saturation. LumiSense • Off: For normal mode. (ambient light sensor is off) •... - Page 27 Adjusts the color temperature. • CT1/CT2/CT3: At higher color temperatures, the screen looks colder; at lower color temperatures, the screen looks warmer. Color • User: Adjusts the red, green, blue, cyan, yellow and Temperature magenta colors. - R Gain/G Gain/B Gain: Adjusts the color balance at or near the white point.
-
Page 28: Image
Image • Front: The factory default setting. Projection • Mode Rear: Reverses the image so you can project from behind a translucent screen. • Auto: Automatically adjusts projection location of image. Projection • Desktop Location • Ceiling: Turns the image upside down for ceiling- mounted projection. - Page 29 Manually adjusts the shape and size of an image that is unevenly rectangular on all sides. Press to select the corner that you wish to adjust. Press four directional selection keys to adjust the image shape. 4 Corner Correction Please adjust 4-corner correction separately for each aspect ratio, and its memory is allowed to save 4 sets of settings only.
- Page 30 Choosing "Yes" returns the display parameters on this menu Reset to the factory default settings. Note: "H. Position", "V. Position", "Frequency" and "Tracking" functions are not supported under video mode. Note: "HDMI Color Range" and "HDMI Scan Info" are only available when the input signal is HDMI.
-
Page 31: Management
Firmware Version Displays current firmware version. • OTA (Over-the-air): Connect the projector to the internet using the Acer eDisplayPro app. Press "ENTER" after selecting "OTA" and the projector will automatically search for the latest firmware version available. Firmware... - Page 32 • USB: Download new media FW files by one compressed file from acer global website. Copy all uncompressed files in USB flash drive (Acer_K650i_USB.bin), and plug in projector. Press "ENTER" after selecting "USB" and the projector will automatically search for the latest Firmware firmware version available.
-
Page 33: Network
Network The default value is "On". Choose "On" to enable the WiFi WiFi connection. Displays the LAN IP assigned by the wired network. If a RJ-45 LAN IP cable is not connected, the LAN IP will be 0.0.0.0. WiFi IP Display the WiFi IP of this projector. - Page 34 If you see a discrete or overlapping image while wearing DLP 3D glasses, you may need to execute this function to get best 3D L/R Invert match of left/right image sequence to get the correct image (for DLP 3D). Choose "On" to display the 3D warning message. 3D Warning Message Choosing "Yes"...
-
Page 35: Appendices
Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions Problem Solution No image appears • Make sure all the cables are correctly connected as onscreen described in the "Getting Started"... - Page 36 Partial, scrolling • Press on the remote control and select or incorrectly "RESYNC". displayed image (For notebooks) • For an incorrectly displayed image: • Follow the steps for item 2 (above) to adjust the resolution of your computer. • Press the toggle output settings. Example: [Fn]+[F4], Compaq [Fn]+[F4], Dell [Fn]+[F8], Gateway [Fn]+[F4], IBM [Fn]+[F7], HP [Fn]+[F4], NEC [Fn]+[F3], Toshiba [Fn]+[F5]...
-
Page 37: Problems With The Projector
Image is too small • Adjust the zoom lever on the top of the projector. or too large • Move the projector closer to or further from the screen. • Press "SETTING" on the control panel or remote control. Go to "Image" > "Aspect Ratio" and try different settings. -
Page 38: Osd Messages
OSD Messages Condition Message Reminder Message Fan Fail - the system fan is not working. Fan Fail. Lamp will automatically turn off soon. Projector Overheated - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it is used. Please also check the dust filters if they are installed. -
Page 39: Led & Alarm Definition Listing
LED & Alarm Definition Listing LED Messages Message Power LED LAMP LED TEMP LED Blue Standby (Power cord plugged in) Power on LED lamp retry Quick flashing Turning off (Cooling Quick flashing state) Turning off (Cooling completed) Firmware download Error (Thermal failure) Error (Fan lock failure) Quick flashing... -
Page 40: Using The Inner Connector(S)
Using the inner connector(s) Turn the projector off by pressing (POWER). Allow the projector at least 45 minutes to cool down. Disconnect the power cord. Turn the projector upside down to locate the inner connector cover. (Illustration #1) Use a screwdriver to remove the screw(s) from the cover. (Illustration #2) Push up and remove the cover. -
Page 41: Specifications
Specifications The specifications below are subject to change without notice. For final specs, please refer to Acer's marketing documentation. Projection system ™ Resolution 1080p Computer compatibility Refer to the "Compatibility Modes" section for more information. Aspect ratio Auto, 4:3, 16:9, Full, L.Box Displayable colors 1.07 billion colors... - Page 42 Standard package contents • AC power cord x 1 • VGA cable x 1 • Acer Projector Multi-media (CD-ROM) x 1 • Remote control x 1 • Battery x 1 (for the remote control) • User's guide (CD-ROM) x 1 •...
-
Page 43: Compatibility Modes
Compatibility Modes VGA Analog - PC Signal H.Frequency Mode Resolution V.Frequency [Hz] [KHz] 31.47 37.86 640 x 480 37.50 43.27 61.91 35.20 37.88 48.08 SVGA 800 x 600 46.88 53.67 77.43 48.36 56.48 1024 x 768 60.02 68.68 98.96 63.85 1152 x 864 67.50 77.10... - Page 44 1280 x 768 47.78 1280 x 768 60.29 1280 x 768 68.63 1280 x 720 45.00 1280 x 800 49.70 1280 x 800 - RB 101.6 WXGA 1440 x 900 55.94 1680 x 1050 65.29 1366 x 768 47.71 1920 x 1080-RB 66.60 1920 x 1080-EIA 67.50...
- Page 45 SXGA+_60 1400 x 1050 59.978 65.317 UXGA_60 1600 x 1200 Mac G4 640 x 480@60Hz 59.94 31.469 MAC13 640 x 480@67Hz 66.667 Mac G4 800 x 600@60Hz 60.317 37.879 Mac G4 1024 x 768@60Hz 60.004 48.363 MAC19 1024 x 768@75Hz 75.02 60.241 MAC21...
- Page 46 MHL - Video Signal Mode Resolution V.Frequency [Hz] H.Frequency [KHz] 720 x 480 480i 15.73 (1440 x 480) 480p 720 x 480 31.47 720 x 576 576i 15.63 (1440 x 576) 576p 720 x 576 31.25 720p 1280 x 720 45.00 720p 1280 x 720...
-
Page 47: Regulations And Safety Notices
Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. -
Page 48: Declaration Of Conformity For Eu Countries
Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby, declares that this projector series is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Compliant with Russian regulatory certification... - Page 49 List of applicable countries This device must be used in strict accordance with the regulations and constraints in the country of use. For further information, please contact a local office in the country of use. Please see http://ec.europa.eu/enterprise/rtte/implem.htm for the latest country list.
-
Page 50: Declaration Of Conformity
New Taipei City 221, Taiwan Declaration of Conformity Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan Contact Person: Mr. RU Jan, e-mail:ru_jan@acer.com.tw And, Acer Italy s.r.l Via Lepetit, 40, 20020 Lainate (MI) Italy Tel: +39-02-939-921, Fax: +39-02 9399-2913 www.acer.it... - Page 51 Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.