Recovering Saved Data; Cleaning The Machine - Bernina 790 Manual

Setup-Program
> Touch the icon «Updating the machine».
UPDATE
> Touch the icon «Saving data on USB stick».
> Touch the icon «Update» to start the update of the software.
Update
Update

Recovering saved data

NOTICE
BERNINA USB stick (optional accessory) has been removed too early
Saved data cannot be transferred and the machine cannot be used.
> Remove the BERNINA USB stick (optional accessory) only after the saved data has been transferred
If personal data and settings after a software update are not available anymore, they can be transfered to the
machine again afterwards.
> Insert the BERNINA USB stick (optional accessory) with the latest software into the USB port (1).
> Touch the icon «Setup Program».
> Touch the icon «Machine settings».
> Touch the icon «Maintenance/Update».
> Touch the icon «Updating the machine».
UPDATE
> Touch the icon «Transferring saved data to machine».

Cleaning the machine

The Setup Program provides animations how to clean the machine. In chapter «Maintenance and Cleaning»,
there are more illustrated step by step instructions (see page 172).
> Touch the icon «Setup Program».
66
successfully.
1
035964.50.04_2014-08_Manual_B790_EN