Panasonic KX-NS1000 Operating Manual page 25

MONITOR:
Used for hands-free dialing. You can monitor
the party's voice in hands-free mode.
AUTO ANS (Auto Answer)/MUTE:
Used to receive an incoming call in hands-free
mode or mute the microphone during a
conversation.
MUTE:
Used to mute the handset and microphone
during a conversation.
TRANSFER:
Used to transfer a call to another party.
HOLD:
Used to place a call on hold.
FLASH/RECALL:
Used to disconnect the current call and make
another call without hanging up.
This button can also be used as a CANCEL
button while on-hook.
CONF (Conference):
Used to establish a multiple party conversation.
VOICE CALL/MUTE:
Used to monitor an intercom call automatically,
but it cannot be used for hands-free
conversations. It also mutes the handset
microphone during a conversation.
Call Forwarding (FWD)/Do Not Disturb
(DND):
Used to perform Call Forwarding (FWD) or Do
Not Disturb (DND).
PROGRAM:
Used to enter and exit the Programming mode.
Document Version 2013-04
1.1.6 Before Operating the Telephones
MONITOR
AUTO ANS
MUTE
TRANSFER
HOLD
FLASH/
RECALL
CONF
Conference
VOICE CALL
MUTE
FWD/DND
PROGRAM
Transfer
Hold
Flash
Operating Manual 25