SolaX Power X1 Series User Manual page 18

Operation Method
﹦﹦﹦﹦ Grid ﹦﹦﹦﹦
U
I
Pout
b) Solar
This status shows the real time PV condition of the system,
such as input voltage, current and power situation of each PV input.
Press up and down button to review parameter, Press "ESC" to return to Status.
﹦﹦﹦﹦ Solar ﹦﹦﹦﹦
U1
I 1
P1
c) Load
If the inverter is plugged in a smart plug, this status shows the real time
load power, include load1 power and load 2 power.
Press up and down button to review parameter, Press "ESC" to return to
Status.
﹦﹦﹦﹦ Load ﹦﹦﹦﹦
Load 1 Power
Load 2 Power
●
Settings
Setting function is used for setting the inverter for time, connection, Grid
and so on.
Since this function will change the inverter's parameter, the end user with
the user password as"0000" has the limited authority to change the setting.
We need installer password to do most of the professional setting.
32
0.0 V
0.0A
0.0W
0.0V
0.0A
0.0W
0.0 W
0.0W
Password
The default password is "0000"for end user, which only allows the user to
review the current setting and some easy setting. If professional change is
needed, please contact with the distributor or factory for installer password.
We need to increase or decrease the word by pressing up or down button.
Press OK to confirm an alternate to the next word. After word is confirmed,
,press "OK" to enter password.
﹦﹦﹦﹦ Password ﹦﹦﹦﹦
0 0 0
Setting
If inputting the installer password, the information of the LCD interface is
as below.
﹦﹦﹦﹦ Setting ﹦﹦﹦﹦
Safety
Language
Date Time
a) Safety
The user can set the safety standard here. According to different countries
and grid tied standards. There is 10 standards for choice (May change without
notice).
﹦﹦﹦﹦ Safety ﹦﹦﹦﹦
country
VDE4105
Item Country Item
Standard
AS/N2S 4777.2:2015 3
1 Australia
2 4
EN50438_NL Netherland
Operation Method
0
Country
Standard
IEC 61727
India
VDE 4105
German
33