Charging Instructions; Charging Indicator; Charging Procedure - Erbauer ERB607CHR Original Instructions Manual

CHARGING PROCEDURE

NOTE: Before using the tool, read the
instruction book carefully.

CHARGING INSTRUCTIONS

1. CHARGING YOUR BATTERY PACK
WARNING:
The charger and battery pack are
specifically designed to work together so do not
attempt to use any other devices. Never insert or
allow metallic objects into your charger or battery
pack connections because an electrical failure and
hazard will occur.
2. HOW TO CHARGE YOUR BATTERY
CHARGING PROCEDURE
1) Plug the charger into an appropriate outlet.
2) Slide the battery pack into the charger. The
charge indicator LIGHT (3) will become green and
flash to show charging has started.
3) After charging approx 1-2 hours, the light will
stay green without flashing, which means the
battery is full, and charging is completed.
WARNING: When battery charge runs
out after continuous use or exposure
to direct sunlight or heat, allow time for the
battery to cool down before re-charging to
achieve the full charge.

CHARGING INDICATOR

This charger is designed to detect some problems
that can arise with battery packs. Indicator lights
indicate problems (see table below). If this occurs,
insert a new battery pack to determine if the
charger is OK. If the new battery charges correctly,
then the original pack is defective and should be
returned to a service center or recycling service
center. If the new battery pack displays the same
problem as the original Battery Pack, have the
charger tested at an authorized service center.