Advertisement
Step 3. VESA Monitor Bracket Attachment: Turn the monitor face down on a large flat
surface. Locate the four VESA mounting holes on the rear of the monitor.
a. Determine if spacers are required: Some monitors have a "recess" on the rear
of the monitor. Spacers are provided to fill this gap. See Table A for spacer
length options.
b. Determine Screw Length: Only use the metric M4 screws provided. The screw
length is determined by the spacers used (see Table A).
VESA Monitor Bracket
Recess Depth
0
.250 (1/4)
.500 (1/2)
Spacer
No Spacer Needed
Screws and Spacers are Shown to Scale
Installation Instructions
(4) Screws, Metric
See Table Below
Bottom
of Monitor
Table A
Spacers
(See Table Below)
VESA Hole Pattern
Recess
Screw
10mm
18mm
25mm
Page 3
Advertisement
