8.8.3
Spot Monitor screen
Siemens Building Technologies
Fire Safety & Security Products
NOTE
Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3 mode of the 9-channel
DVR.
You can adjust the display dwell time by highlighting the box beside Interval and
pressing the
button.
You can select dwell intervals ranging from 1 second to 1 minute.
Highlight Event Monitoring On and press the
Pressing the
button toggles between On and Off.
When it is On, the DVR will display the camera associated with the event when
an event occurs.
1.
Highlight Spot Monitor in the Display menu and press the
The Spot Monitor setup screen displays.
Fig. 70
Spot Monitor screen
You can define which cameras display sequentially on the Spot Monitors.
2.
Highlight the box in the Channels column for the desired Spot Monitor and
press the
button.
You can save your Display settings by highlighting Save and pressing the
button.
Selecting Cancel exits the screen without saving the changes.
Configuration
button.
button.
67
03.2007