Osd Menu - RunCam Swift 2 User Manual

OSD Menu

OSD Setting:
Press and hold the UP button for 2 seconds to enter OSD setup menu.
RunCam
1234567890ABCDEFG
HIJKLMNOPQRSTUVWX
YZa b c d e f g h i j k l m n o
p q r s t u v w x y z . - : / @
PILOT
TIMER
VOLTAGE
BASELINE
DEFAULT
EXIT
· PILOT: ON/OFF
· TIMER: ON/OFF
· VOLTAGE: ON/OFF
· BASELINE: OFF/1-9
· EXIT: Save the current settings and exit
Customize the PILOT name: Use the UP, DOWN,
LEFT and RIGHT buttons to navigate through the
letters and confirm with the CENTER button.
Quick settings:
Long press the LEFT/DOWN/RIGHT button
for 2 seconds to activate the VOLTAGE/PILOT
ON
/TIMER, then you can use the UP, DOWN,
ON LEFT and RIGHT buttons to move it to the
appropriate location on the screen, and press
ON
the CENTER button to exit.
OFF
The OSD displays by default the input voltage
of the camera. If the VBAT + cable is
connected to the battery's positive side, it
displays the battery voltage instead.