Frequency:channels[:State] - Keysight N5171B EXG Manual

Basic Function Commands
Frequency Subsystem ([:SOURce])
Example
:FREQ:CHAN:NUMB 24
The preceding example sets the channel number to 24 for the current band.
Range

:FREQuency:CHANnels[:STATe]

[:SOURce]:FREQuency:CHANnels[:STATe] ON|OFF|1|0
[:SOURce]:FREQuency:CHANnels[:STATe]?
This command enables or disables the frequency channel and band selection.
The signal generator frequency will be set to the channel frequency when the
state is on. To set frequency channel bands refer to the
:FREQuency:CHANnels:BAND command.
Keysight EXG and MXG X-Series Signal Generators SCPI Command Reference
*RST +1
P-GSM Base/Mobile:
E-GSM and R-GSM Base/Mobile:
DCS Base/Mobile:
PCS Base/Mobile:
GSM-450 Base/Mobile:
GSM-480 Base/Mobile:
GSM-850 Base/Mobile:
NADC Base/Mobile:
800MHz Base/Mobile:
1500MHz Base/Mobile:
TETRA 380/390 Mobile:
TETRA 390/4000 Base:
TETRA 410/420 Mobile:
TETRA 420/430 Base:
TETRA 460/470: 2400 through 2800
TETRA 870/876 Mobile:
TETRA 915/921 Base:
PHS Standard:
DECT Standard:
Key Entry Channel Number
Supported All Models
1–24
1–1023
512–885
512–900
259–293
306–340
128–251
1–1023
0–640
0–960
3600–4000
3600–4000
800–1200
800–1200
2400–2800
600–640
600–940
1–255
0–9
73