Download Print this page

Error Code List - Toshiba e-STUDIO 2555C Service Manual

Multifunctional digital color systems
Hide thumbs Also See for e-STUDIO 2555C:

Advertisement

8.2

Error Code List

The following error codes is displayed at the upper right of the screen when the "CLEAR PAPER" or
"CALL SERVICE" symbol is blinking.
8.2.1
Jam
Error code
Classification
E010
Paper exit jam
E011
Other paper jam
E013
Other paper jam
E020
Paper exit jam
E030
Other paper jam
E061
E062
E063
E064
E065
E090
E091
E0A0
e-STUDIO2555C/3055C/3555C/4555C/5055C
ERROR CODE AND TROUBLESHOOTING
Contents
Jam not reaching the exit sensor: The paper
which has passed through the fuser unit does
not reach the exit sensor.
Transfer belt paper-clinging jam: The paper
after the 2nd transfer is clinging to the transfer
belt.
The paper jam occurred between the
registration pass sensor and the paper clinging
detection sensor.
Stop jam at the exit sensor: The trailing edge of
the paper does not pass the exit sensor after its
leading edge has reached this sensor.
Power-ON jam: The paper is remaining on the
paper transport path when power is turned ON.
Incorrect paper size setting for 1st drawer: The
size of paper in the 1st drawer differs from size
setting of the equipment.
Incorrect paper size setting for 2nd drawer: The
size of paper in the 2nd drawer differs from size
setting of the equipment.
Incorrect paper size setting for PFP upper
drawer: The size of paper in the 3rd drawer
differs from size setting of the equipment.
Incorrect paper size setting for PFP lower
drawer: The size of paper in the 4th drawer
differs from size setting of the equipment.
Incorrect paper size setting for bypass tray:
The size of paper in the bypass tray differs
from size setting of the equipment.
Image data delay jam: Image data to be printed
cannot be prepared.
Motor-ON time-out jam: The equipment does
not operate normally because abnormality
occurred on an interface between the SYS
board and engine firmware.
Image transport ready time-out jam: Image
data to be printed cannot be sent.
© 2012-2013 TOSHIBA TEC CORPORATION All rights reserved
8 - 4
Troubleshooting
P. 8-45
P. 8-61
P. 8-63
P. 8-47
P. 8-63
P. 8-64
P. 8-64
P. 8-64
P. 8-64
P. 8-64
P. 8-64
P. 8-64
P. 8-65

Hide quick links:

Advertisement

loading
Need help?

Need help?

Do you have a question about the e-STUDIO 2555C and is the answer not in the manual?

Questions and answers

gourdelier
January 28, 2025

remplacement toner

1 comments:
Mr. Anderson
February 10, 2025

To replace toner in the Toshiba e-STUDIO 2555C, follow these steps:

1. Open the front cover of the printer.
2. Remove the empty toner cartridge.
3. Insert a new toner cartridge of the correct color.
4. Close the front cover.
5. Enter the code [4833] on the control panel to recover from the toner empty status.
6. Ensure that "WAIT" is displayed on the screen.

This completes the toner replacement process.

This answer is automatically generated

Steve Perri
April 17, 2025

how to change the waste toner box

Save PDF