The Blankets - Stryker Mistral-Air Plus MA1100-PM User Manual

E.
When the yellow LED under the wrench turns on, accompanied
by a single beep, the Mistral-Air
used for ≥ 2000 hours. This service indicator means that the
filter must be replaced. Reference Chapter 12 for filter
replacement instructions.
Alarm type
Service Indicator
Under temperature alarm
(primary and
temperature alarm

9.3 The Blankets

Do not use the Mistral-Air
disposables other than Mistral-Air
result.
The Mistral-Air Warming System is a forced air warming device and is
comprised of a warming unit and a variety of blankets. It is intended to raise
and maintain patient temperature by means of surface warming.
®
All Mistral-Air blankets do not contain latex components and are:
 Made from non-woven polypropylene and polyethylene
 Manufactured to meet flammability standards
 MR (Magnetic Resonance) Conditional
and MA05XX-PM series only)
 Non-conductive (electrical and thermal).
 Non-sterile, except for several dedicated blankets (ask your distributor)
 Blanket box including an instruction insert in the main world languages
 Single-patient use only
 Made from lightweight, soft materials that have been approved for skin
contact
Mistral-Air
towards the patient's skin and the white or reflective layer away from
the patient's skin. The blue side provides the air distribution towards
the patient.
Never fold the blankets during use.
INT/R295-EN-PM/4-09/14
Service Indicator
secondary) Over
®
blankets need to be used with the soft blue material
®
Plus warming unit has been
Alarm priorities
Low priority
Low Priority
Medium priority
®
Plus warming unit with any forced air
®
blankets. Thermal injury may
(MA02XX-PM series, MA2XXX-PM series
20