Maintenance And Service - Bosch AL1404 Original Instructions Manual

Hide thumbs Also See for AL1404:

Original instructions (5 pages)

Operating instructions manual (32 pages)

Table Of Contents

Table of Contents

Available languages

OBJ_BUCH-155-003.book Page 7 Monday, January 20, 2014 7:49 AM

Product Features

The numbering of the product features refers to the illustra-

tion of the battery charger on the graphics page.

1 Battery with contact APT*

Technical Data

Battery Charger

Article number

Output voltage (automatic voltage detection)

Charging current

Allowable charging temperature range

Charging time for battery capacity, approx.

– 1.2 Ah

– 1.5 Ah

– 2.0 Ah

Number of battery cells

Weight according to EPTA-Procedure 01/2003

Protection class

Please observe the article number on the type plate of your battery charger. The trade names of individual battery chargers may vary.

Operation

Starting Operation

 Observe the mains voltage! The voltage of the power

supply must correspond with the data given on the name-

plate of the battery charger. Battery chargers marked with

230 V can also be operated with 220 V.

Charging Procedure

The charging procedure starts as soon as the mains plug of

the battery charger is plugged into the socket outlet and the

battery 1 is inserted into the charging compartment 2.

The battery charge indicator 3 is not a charge-control indica-

tor. The lit indicator signalises the flow of charging current.

The charging procedure is not ended automatically. There-

fore, disconnect the battery charger from the mains supply af-

ter the battery has been charged and remove the battery. A

temperature increase of the battery indicates that the battery

is fully charged.

Troubleshooting – Causes and Corrective

Measures

Cause

Corrective Measure

No charging procedure possible

Battery contacts

Clean the battery contacts

contaminated

(e.g. by inserting and remov-

ing the battery several times)

or replace the battery

Battery pack defective

Replace the battery

Bosch Power Tools

2 Charging compartment

3 Battery charge indicator

*Accessories shown or described are not part of the standard de-

livery scope of the product. A complete overview of accessories

can be found in our accessories program.

AL 1404

2 607 225 0..

7.2 – 14.4

400

°C

0 – 45

6 – 12

0.4

Cause

Corrective Measure

Battery charge indicator 3 does not light up

Mains plug of battery charger

Insert mains plug (fully) into

not plugged in (properly)

the socket outlet

Battery not (properly)

Properly insert battery into

inserted

battery charger

Socket outlet, mains cable

Check the mains voltage;

or battery charger defective

have the battery charger

checked by an authorised

after-sales service agent for

Bosch power tools

Working Advice

With continuous or several repetitive charging cycles without

interruption, the charger can warm up. This is not meaningful

and does not indicate a technical defect of the battery charger.

A battery that is new or that has not been used for a longer pe-

riod will not achieve its full capacity until after approx. 5

charging and discharging cycles. Leave such a battery in the

battery charger until it has warmed up considerably.

A significantly reduced working period after charging indi-

cates that the battery is used and must be replaced.