Mitel SX-200 ICP Technician's Handbook page 48

SX-200 ICP CX/CXi Technician's Handbook
7. Remove the internal CompactFlash card. Keep it on hand.
8. To install the hard drive,
a. Set the jumpers on the drive to the Master setting.
b. Lower the drive onto the bracket ( ).
c. Secure the drive to the sides of the bracket with the four screws
provided ( ).
d. Connect the power and IDE cables to the corresponding connectors
on the hard drive and main board ( ). The cables are keyed for
proper connection.
Connect the system hard drive IDE cable to the main board
Note:
connector labeled MPC8270 HARDDRIVE.
40