Related Manuals for Hilti TE 35
Summary of Contents for Hilti TE 35
- Page 1 *312483* Operating instructions TE 35 312483 Rotary Hammer Drill 3-Wire Grounded Construction Printed: 07.07.2013 | Doc-Nr: PUB / 5070951 / 000 / 00...
-
Page 2: General Safety Rules
General safety rules an increased risk of electric shock if your body is ground- 5.2 Do not force tool. Use the correct tool for your application. The correct tool will do the job better and 3.4 Don’t expose power tools to rain or wet condi- safer at the rate for which it is designed. -
Page 3: Technical Data
Hilti TE35 Combihammer Technical data Input power: 830 W Voltage (versions): 120 V Input current: 7.2 A Frequency: 50–60 Hz Weight of machine: 4.95 kg / 10.9 lbs Dimension: 460×110×200 mm / 18.1″×4.3″×1.8″ Speed under load: 0–620 r.p.m. Hammering under load: 0–3720 blows/min. - Page 4 When attaching chuck, pull the sleeve forward Regularly with a small amount of Hilti grease. and hold it there. Slide chuck onto guide tube Note: The use of TE-C chisels is not recom- as far as it will go.
- Page 5 Manufacturer's warranty – tools Hilti warrants that the tool supplied is free of defects in material and workmanship. This warranty is valid so long as the tool is operated and handled correctly, cleaned and ser- viced properly and in accordance with the Hilti Operating Instructions, and the technical system is maintained.
- Page 6 Telephone (918) 252-6000 Telphone (905) 813 9200 Tulsa, Oklahoma 74146 Telephone (918) 252-6595 Hilti = registered trademark of Hilti Corp., Schaan W 2348 0206 10-Pos. 3 1 Printed in Liechtenstein © 2006 312483/D Right of technical and programme changes reserved S.E.& O.
Need help?
Do you have a question about the TE 35 and is the answer not in the manual?
Questions and answers