Advertisement
28i/124i
3. From the Main Menu, load the data file for the site you are calling:
•
Select File and Read.
•
Choose the directory that contains your customer data files and
press Enter.
•
Highlight the customer data file you want to load and press Enter.
site, make sure the Modem phone entry is the extension number of the
ASTU circuit (or dial tone source) connected to the site modem.
4. Press Esc to return to the Main Menu, select Communication and
press Enter.
Select Modem Control and press Enter.
5.
For Local PC Connections, skip to Step 9.
6. Type AT&F and press Enter. You should see OK.
entry, check your modem connections and settings and try again.
7. Press F2: Auto Dial.
in Part 5 and the Modem phone entry in the Customer Information
Screen.
the site modem's telephone number and press Enter again.
8.
After you connect to the site modem, you will see a numeric connect
message (12). This is the connect message returned by the site
modem.
Type AT and press Enter. You should see OK. This response is from
9.
the site's LAPB.
when prompted to do so. Repeat from step 6. If you still don't see OK,
there is a problem with the site modem's LAPB setup.
10. Type ATD #*#* and press Enter.
then go on to step 11.
11. When the remote system asks for the password, enter the programming
password and press Enter.
code/software version error message, type U to update.
12. Press Esc twice to return to the Main Menu.
Windows PC Program Only:
To connect to the site:
1.
Make sure your modem is correctly connected to your office computer,
an outside telephone line (or other dial tone source) and is functioning
correctly.
Remote Modem Installation Instructions
If you are using this procedure to check the site modem while on
If you don't get the proper response (OK) or you can't type the
This automatically sends out the initialization string you entered
If you don't have a Modem phone entry, press Enter, type ATDT,
If you don't see OK, press F4 to break the connection and Esc
If you see ERROR, type ATZ to reset the site's LAPB. You can
You can now program the remote system. If you see an ID
Your modem can connect to COM1, COM 2, COM3 or COM4.
9
Advertisement
