Related Manuals for Vela Tango 500
Summary of Contents for Vela Tango 500
- Page 1 U S E R M A N U A L VELA Tango 500/500EL/510/510EL VERSION: Manual no. 105234 VELA Tango 500 VELA Tango 500El VELA Tango 510 VELA Tango 510El...
-
Page 2: Table Of Contents
1.4.2. Frame 1.4.3. Upholstery 1.5. RECYCLING 1.6. SETTINGS 1.6.1. Attaching the backrest 1.6.2. Height adjustment (VELA Tango El) 1.6.3. Height adjustment (VELA Tango) 1.6.4. Setting angle of seat 1.6.5. Setting angle of backrest 1.6.6. Adjusting lumbar support (ALB back) 1.6.7. Setting the back height 1.6.8. -
Page 3: Introduction
1.0. INTRODUCTION DEAR CUSTOMER, We would like to thank you for choosing VELA Tango. We are certain that you will enjoy using this chair every day. This user manual contains useful information regarding settings, operation and maintenance of your VELA Tango. -
Page 4: Safety
VELA assumes no responsibility for brake must be activated. damage to the product or the user that occurs due to: All versions of VELA Tango 500/510 have been tested and approved for :: Transport users weighing up to 160 kg. -
Page 5: Unpacking The Chair
Note: see section 1.6.1. for properly 1.5. RECYCLING attaching the backrest. Several of the chair's materials are recyclable. Please return the chair to VELA or to your local recycling 1.4. CARE & MAINTENANCE centre. We recommend an annual inspection of VELA Tango to identify any defective or worn parts. -
Page 6: Settings
Can be operated from the underside of either the right or left armrest. The armrest can easily be moved to the opposite side. VELA Tango El is also available with height adjustment via hand box (if caregivers are to be able to adjust the height). -
Page 7: Setting Angle Of Seat
1.6.4. SETTING ANGLE OF SEAT Adjusted by pulling up the middle handle on the right-hand side. The handle is pressed down to lock the desired seat angle. Note: Be aware of pinching risk when adjusting the seat angle! 1.6.5. SETTING ANGLE OF BACKREST Adjusted by pulling up the rear handle on the right-hand side. -
Page 8: Back Bolt (High Back)
1.6.8. BACK BOLT (HIGH BACK) The backrest can be set to a specifi c angle by adjusting and attaching the bolt mounted on the back of the backrest. 1.6.9. ADJUSTING THE ARMREST HEIGHT Adjusted by loosening the screw on the armrest bar and adjusting the height of the armrest. -
Page 9: Rotation
1.6.13. BRAKE The brake on the VELA Tango is activated by moving the handle on the side of the chair forward. Unlock the chair by moving the handle back into the upright position. Note: The brake can... -
Page 10: Footrest (Optional)
1.6.18. FOOT PEDAL FOR BRAKING (OPTIONAL) On a VELA Tango with foot pedal the brake is activated by pressing the upper part of the pedal forward. Unlock the chair by moving the foot brake back into the upright position. -
Page 11: Hand Box (Optional)
1.6.20. HAND BOX (OPTIONAL) The hand box is used via push buttons on the front. VELA hand boxes can have one or more functions. The icons on the hand box show the button functions. Note: Insert plug in hand box to operate functions. - Page 12 VELA :: Gøteborgvej 8-12 :: DK-9200 Aalborg SV :: Tlf: +45 96 34 76 00 :: mail@vela.dk www.vela.eu...
Need help?
Do you have a question about the Tango 500 and is the answer not in the manual?
Questions and answers