Talking Back To A Hoot Service; Mute A Hoot Service; Clearing A Hoot Service; Global Muting - Speakerbus iD 712 User Manual

iD 712 User Guide

Talking back to a Hoot Service

If it is possible to talk back to a hoot service the screen will display the
following text: Press "T" to talk.
To talk back to a hoot service:
1. Press and hold *T (where applicable).

Mute a Hoot Service

To mute a hoot service:
1. Press f3 (MUTE VS).
2. Press f3 (UN-MUTE) again to remove mute.

Clearing a Hoot Service

To clear a hoot service:
1. Press f1 (MENU) to display Main.
2. Press f4 (NEXT>) to display Program.
3. Ensure Clear Voice Service is highlighted and press OK.

Global Muting

Global muting is a muting function applied on
lines and can only be set through iManager. It
is applicable to hoots and ARD and MRD calls.
It is best described using an example. Take, for
example, a speaker channel that is monitored by
several local and remote iD 712 units. If a local iD
712 changes the channel state from monitor to talk
the speaker channel is muted on the other local
iD 712s. Remote units are still able monitor the
same speaker channel. The scenario illustration
located on the right helps to make this clearer. The
illustration shows two sites monitoring Channel A.
Site A is the local site, and Site B the remote site.
40