Connections - Toshiba 40L366 * Series Owner's Manual

Connections

Connector
Connection
Connection
SIDE AV
PC/YPbPr Audio
Connection
Connection
SPDIF
(Optical Out)
Connection
SIDE AV
Side AV
(Audio/Video)
Connection
HEADPHONE
Headphone
Connection
YPBPR YPbPr Video
Connection
Connection
CI Connection
If you want to connect a device to the TV, make sure that both the TV and the device are turned off before making
any connection. After the connection is done, you can turn on the units and use them.
Type
Scart
(back)
VGA
(back)
(side)
YPbPr/PC Audio Cable (not
HDMI
(back)
SPDIF
(back)
AV Cable (not supplied)
(side)
(side)
(back) PC to YPbPr Connection Cable
USB
(side)
(side)
Cables
supplied)
(not supplied)
English - 9 -
Device
N O T E :
connecting a device via
the YPbPr or Side AV
input, you must use the
connection cables to
enable connection. See
the illustrations on the left
side. | You can use YPbPr
to VGA cable (not supplied)
to enable YPbPr signal via
VGA input. | You cannot use
VGA and YPbPr at the same
time. | To enable PC/YPbPr
audio, you will need to use
the side audio inputs with
a YPbPr/PC audio cable
(not supplied) for audio
connection. | If an external
device is connected via the
SCART socket, the TV will
automatically switch to AV
mode.| When receiving
DTV channels (Mpeg4
H.264) or while in Media
Browser mode, output
will not be available via
the scart socket. | When
using the wall mounting
kit (available from third
party in the market, if not
supplied), we recommend
that you plug all your cables
into the back of the TV
before mounting on the
wall. | Insert or remove the
CI module only when the
TV is SWITCHED OFF.
You should refer to the
module instruction manual
for details of the settings.
The/Each USB input of your
TV supports devices up to
500mA. Connecting devices
that have current value
above 500mA may damage
your TV. | By connecting
an HDMI cable to your
TV, you have to use only
a shielded HDMI cable
to guarantee a sufficient
immunity against parasitic
frequency radiation.
W h e n
|