Bio-Well Operational Manual

Table of Contents

Quick Links

Download this manual

Purpose ......................................................................................................................... 1

Beginning of operations ................................................................................................ 1

"Full Scan" mode .......................................................................................................... 4

Human Energy screens ................................................................................................. 6

Before - After Scans ................................................................................................... 12

Stress Test Scan .......................................................................................................... 13

Environment mode ...................................................................................................... 13

BioClip mode .............................................................................................................. 16

Left-side panel ............................................................................................................ 16

Calibration mode ........................................................................................................ 16

Work off-line mode .................................................................................................... 18

GDV readings saved in computer ............................................................................... 19

Important remarks ....................................................................................................... 20

Purpose

The Bio-Well device is intended to perform the following functions:

1. Analyze the complete energetic state of a person by scanning 10 fingers.

2. Produce a functional analysis of a person's Energy, Stress and Balance levels by

scanning 2 fingers.

3. The dynamic recording of signals, during a period ranging from a few minutes

to many hours, using a special sensor which detects variations of environmental

energy parameters.

4. Record a person's Human Energy Field (HEF) response to environmental

stimuli, including potential allergens, food, medicine, etc.

Initial Operation

To begin operation of the device, first download and install the latest version of the

software from www.Bio-Well.com

the computer's firewall, antivirus, or similar security software. Disabling of one or

more of these resident programs may be necessary for successful installation. Once the

installation process is completed, and a subscription has been purchased, connect one

end of the included USB cable to the rear of the Bio-Well device, and the other end to

the computer.

Subscription login and payment information can be reviewed and updated via the

Bio-Well

Operational Manual

March 2015

Download and/or installation may be affected by

Table of Contents

Need help?

Do you have a question about the Bio-Well and is the answer not in the manual?

Questions and answers

Summary of Contents for Bio-Well Bio-Well

Page 1: Table Of Contents
Once the installation process is completed, and a subscription has been purchased, connect one end of the included USB cable to the rear of the Bio-Well device, and the other end to the computer.
Page 2 1. Click the Bio-Well software shortcut, or find and click Bio-Well.exe to launch the software directly. The Login window appears (Fig.1). Fig.1 For standard online operation (connected to the Internet), enter the subscription Login (username) and Password and click Login. If testing a new device, or one associated with a different subscription account, it will be necessary to use the temporary- demonstration account Login/Password: demopro/demopro.
Page 3 button located at the upper-right of the main window (Fig2-™). Fig.2 To conduct a scan, a Card (Fig.3) must first be created by clicking the + Add button (Fig.2-r). Name, Gender and Birthdate are required. Adding a picture and other information is optional.
Page 4: Full Scan Mode
At the bottom of the Cards column, SCROLL arrows are available to navigate the entire list of Cards. Full Scan Mode With the Bio-Well device connected to the computer, choose a Card and click Full Scan to enable the 10-finger interface. Fig.4 Click Scan (or press Spacebar) to initiate a capture of each finger, one-by-one, starting with the Right Thumb.
Page 5 Field window displaying 3 views of the HEF. Fig.5 Scan Management Within the main window, in the Scans column, you will see readings taken for the chosen card with date and time of recording. Each individual reading, listed in the Scans column, may be opened for review, deleted or sent (Fig.6-¯) to another account.
Page 6: Human Energy Screens
Human Energy Windows Full Screen mode may be accessed by clicking the button (Fig.7-£). Energy Field : Presentation of front and side views of the entire HEF. Pointing the cursor to the various areas of an image enables sector-views of the fingers as they correspond to different parts of the body.
Page 7 Chakras : Click on a particular Chakra to see the description. Fig.8 The Create Music button (Fig.8-™) generates a unique music file which may be saved to be used with a BioCor device (currently not available in the U.S.). Biorhythms button (Fig.8-£) presents the biorhythms for the chosen period of time (Fig.9).
Page 8 Analysis : The three main parameters – Stress, Energy and Balance – as numeric results (Fig.10). Fig.10 Health Status : Shows distribution of Area parameters for different organs and systems (Fig.11). Fig.11...
Page 9 Energy Reserve : Shows distribution of Energy parameters (Fig.12). Fig.12 Show Health Status button (Fig.12-£) displays a comparison of the Health Status and Energy Reserve. It is beneficial when the Energy Reserve outline is wider/larger than the Health Status outline. Balance : Shows the level of Energy for paired systems and organs.
Page 10 Fig.13 Organs Energy : Shows sectors corresponding to different systems and organs (Fig.14). Fig.14...
Page 11 Fingers : Displays parameters for each finger in its own window (Fig.15). Clicking on a finger window opens a larger view of the image and parameters. (Fig.16) Fig.15...
Page 12: Before - After Scans
Fig.16 Report : Prepares a PDF file containing descriptions of the main parameters. Comments and recommendations may be added, and all included information is customizable for corrections and omissions. Export to CSV : Allows for saving the main parameters in CSV format for further processing in Excel, Statistics and other similar programs.
Page 13: Stress Test Scan
Stress Test Scan This mode enables readings from two fingers to produce an analysis of the 3 main parameters. Typically, the Ring fingers (4L and 4R) are used for this scan. However, the use of other fingers is optional. Fig.18 Environment (Sputnik or Water Electrode required) This mode enables the measurement of dynamic processes.
Page 14 server when online again following completion of the session. Labels may be added during readings. Clicking Stop will save the data on the computer if offline, or to the server if online. View offers the list of available parameters to be displayed (Fig.19) Fig.19 For every graph, the scale may be changed by a click on the vertical axis (Fig.20).
Page 15 Right-click enables selection of part of the graph to Save Selected to the new file or Cut Selected part. Statistics button opens the Statistics window. Fig.21 Right-click to add labels and click Calculate. The software calculates parameters for all labeled intervals and parametric / non-parametric statistics. Every interval is compared with the prior interval.
Page 16: Bioclip Mode
BioClip In this mode readings are taken using a grounding cable/wristband. During the first three minutes, a baseline signal is recorded. Left-side Panel This is the location of the following options: DATABASE, RECENT, COMPARE, RECEIVED, and CALIBRATION. DATABASE : Returns to the main Database screen from any process. RECENT : Displays recent scans.
Page 17 • New Moon phase. A separate Calibration Pack User Manual can be found in the Resources section of the Bio-Well website. In the Calibration window, the Information button (Fig.24-à) displays identification and usage data for the connected Bio-Well device. Fig.24...
Page 18: Work Off-Line Mode
Offline Mode Readings may be taken when not connected to the Internet. Data will be saved in the computer and processed when an Internet connection becomes available. In Offline Mode it is necessary to add a Name (Gender and Birthdate for Full Scan) and Select the mode of the Scan.
Page 19: Gdv Readings Saved In Computer
In Full Scan mode, a previously saved data file may be opened with the Import button (Fig.26-à). This allows users of other GDV instruments to use the Bio-Well software. A Card must first be created to be associated with the data to be imported.
Page 20: Important Remarks
- During experiments, do not turn on/off electrical devices within the room where the Bio-Well device is operating. - Do not use cell phones near the Bio-Well device or Sputnik. - The number of people in the room should be the same during the entire experiment.