Tasman Rascali bassinet Assembly Instructions Manual

Tasman Rascali bassinet Assembly Instructions Manual

Advertisement

Quick Links

Assembly Instructions
RECYCLED
Packaging and instructions
printed on recycled materials
Rascali bassinet
Tasman Eco Furniture Pty Ltd
abn.
58 106 988 578
4-6 Merryvale Rd, Minto, NSW 2566
p.o. box
t.
02 9603 5000
f.
02 9603 7000
w.
www.tasmanessentials.com.au
5878 MINTO DC, NSW 2566
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Rascali bassinet and is the answer not in the manual?

Questions and answers

Summary of Contents for Tasman Rascali bassinet

  • Page 1 Rascali bassinet Assembly Instructions RECYCLED Tasman Eco Furniture Pty Ltd abn. 58 106 988 578 Packaging and instructions 4-6 Merryvale Rd, Minto, NSW 2566 p.o. box 5878 MINTO DC, NSW 2566 printed on recycled materials 02 9603 5000 02 9603 7000...
  • Page 2 Parts Checklist End panels x 2 Bassinet x 1 Allen Key x 1 54mm bolts x 12 Mattress x 1 Upper support bars x 2 lower support bars x2 Bassinet support rails x 2 Base x 1 Bassinet holding rods x 2 Castors x 4 Warnings: Important Note...
  • Page 3 Prepare end panel Start by placing one end panel on a clean, soft work surface. Make sure the panel faces the same way up as in the diagram. This side must face up to start. Assemble the support bars Screw each support bar to the end panel. To assist in holding them into position, they have 2 wooden pegs at each end.
  • Page 4 Fit the remaining end panel Put the second end panel into position, line up the holes, and fasten to the support bars and support rails. Connect castor wheels Push the castor wheels into the holes in the bottom of the rails. Ensure they click into place. Turn bassinet upright and lock castors Lock the castors by pushing the lever downwards.
  • Page 5 Prepare the bassinet velcro strips on the bassinet and frame. Velcro strip Velcro strip Velcro strip Velcro strip Fit the bassinet into the frame Put the bassinet inside the frame. Use the velcro strips at the end to temporarily hold the bassinet in place. Pull bassinet holding sleeves through top of frame Feed the bassinet sleeves through the gap between the support bars.
  • Page 6 Fit holding rods Feed the holding rods into the bassinet loops. This will hold the bassinet securely into place. Fit the base and mattress bassinet. Note: as you push down on the mattress you will hear the velcro on the ends of the bassi- net stretching.
  • Page 7 The Tasman Essentials Guarantees & Warranty 100% Satisfaction Guarantee subject only to the conditions below, the purchaser can return the product to the place of purchase for a refund of the full purchase price of this product. Conditions. 1. T 2.

Table of Contents