Table of Contents
Advertisement
2.8.3
Installing M.2 (NGFF) cards
To install an M.2 card:
1.
Locate the M.2 connector (NGFF1) on the motherboard.
2.
Remove the screw on the stand screw.
3.
Prepare the M.2 card.
4.
Align and insert the M.2 card into the M.2 connector (NGFF1).
5.
Secure the M.2 card with the screw you removed in step 2.
NGFF1
Stand screw
•
Please pay attention when removing the screw, the stand screw might be removed
together with it.
•
Ensure that the M.2 card is positioned between the screw and the stand screw before
securing it.
ASUS ESC500 G4
Screw
Screw hole
2-21
Advertisement
Table of Contents
Need help?
Do you have a question about the ESC500 G4 and is the answer not in the manual?
Questions and answers