Table of Contents
Advertisement
Available languages
Available languages
6.
1 Filling the Nebuliser Chamber
For Single Patient Use
1. Connect one end of the driveline to the outlet filter on your compressor.
2. Connect the other end of the driveline to the bottom of the blue nebuliser cup.
3. Remove the nebuliser top from the cup and pour medication into the cup
(max. 10ml.)
4. Screw the top back onto the cup.
5. Connect either the face mask or mouthpiece to the nebuliser top.
All accessories must comply with EN 13544-1
6.
2 Administering the Medication
Switch the compressor unit on. Sitting in an upright relaxed position, place mouthpiece into the
mouth (or face mask over the nose and mouth) and start breathing slowly and deeply. Do not try to
breathe quickly. If you have any problems seek instruction from your doctor or physiotherapy
department at your hospital. Switch off the compressor when the misting has stopped. Unplug the
mains lead.
en
5
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the AC2000 and is the answer not in the manual?
Questions and answers
When can I purchase filters/service pack for medic nebuliser ac 2000
Filters or service packs for the MEDIX AC2000 nebulizer can be purchased as part of the Year Packs, which include replacement filters and other consumables required for single-patient use every quarter, as per the manufacturer's guidelines.
This answer is automatically generated