Enable Vpn Pass-Through; Configure Apn Details - NETGEAR AirCard 790 User Manual

Enable VPN Pass-Through

To connect to a corporate network using VPN, you must first enable VPN connections
(pass-through).

To enable VPN pass-through:
1. From a computer or wireless device that is connected to your network, launch an
Internet browser.
2. Enter http://netgear.aircard or http://192.168.1.1.
Your device might have a different web page address. To get the web page address for
your device, tap Settings > More > Device Information > AC790 Manager or look at the
label underneath the device battery.
A login screen displays.
3. Enter the administrator login password.
The default password is admin. The password is case-sensitive.
The Home screen displays.
4. Select Settings > Router > Basic.
The Basic page displays.
5. In the LAN section, select the On radio button next to VPN Passthrough.
The Submit button displays after you make a selection.
6. Click the Submit button.
Your settings are saved.

Configure APN Details

Your mobile hotspot comes preconfigured with the access point name (APN) for your
network service provider.
The hotspot checks the APN to determine the type of network connection to establish.

To add an APN for another network:
1. From a computer or wireless device that is connected to your network, launch an
Internet browser.
2. Enter http://netgear.aircard or http://192.168.1.1.
Your device might have a different web page address. To get the web page address for
your device, tap Settings > More > Device Information > AC790 Manager or look at the
label underneath the device battery.
A login screen displays.
AirCard 790S Mobile Hotspot
Advanced Settings
85