Do you have a question about the XM-PRO II and is the answer not in the manual?
Questions and answers
John Worth
March 24, 2025
Belt not running console lit up all buttons on handles work
1 comments:
Mr. Anderson
March 24, 2025
The issue may be caused by the safety key not being properly attached. The manual states that before every use, the safety key should be inspected to ensure it stops the treadmill when pulled away from the display. If the console is lit and the buttons work but the belt does not run, check that the magnetic safety key is correctly in place.
This answer is automatically generated
Summary of Contents for PrestigeSports XM-PRO II
Page 1
TREADMILL TREADMILL MAINTENANCE GUIDE MAINTENANCE GUIDE ESSENTIAL TIPS XM-PRO II™ & XM-PRO III™ Official Guide XM-PRO II & III™ LIVE LONGER! TREADMILL COMPONENTS? LOOK AFTER YOUR UNDERSTAND MAINTENANCE TREADMILL & SAVE ££’s YOUR TREADMILL SCHEDULE...
COMPONENTS GUIDE....XM-PRO II ™ MOTORIZED TREADMILL - MAIN DISPLAY BOTTLE HOLDER HANDRAIL QUICK RELEASE LOCK TOWEL RAIL MOTOR COVER SAFETY LOCK SIDE RAIL RUNNING BOARD / BELT END CAP / BELT ADJUSTER FRONT FOOT REAR WHEELS PrestigeSports Treadmill Maintenance Guide...
XM-PRO III ™ MOTORIZED TREADMILL - MAIN DISPLAY BOTTLE HOLDER HANDRAIL HAND CONTROLS + PULSE SENSORS TOWEL RAIL MOTOR COVER SIDE RAIL RUNNING BOARD / BELT ADJUSTABLE INCLINE END CAP / BELT ADJUSTER REAR WHEELS SAFETY LOCK QUICK RELEASE LOCK PrestigeSports Treadmill Maintenance Guide...
A vaccum cleaner is sufficient to clean the internal parts. 3. Inspect the motor belt for wear / damage. If the belt looks cracked or frayed then contact your retailer for a replacement. The motor belt should easily last a year under normal use. PrestigeSports Treadmill Maintenance Guide...
• After adjusting the belt, walk or run for a few minutes to test. If the belt is still needs adjusting then repeat the adjustment procedure again then re test. PrestigeSports Treadmill Maintenance Guide...
Page 10
BE CAREFUL of moving parts and DO NOT put your fingers near the running belt. REMEMBER to always remove any jewelry / loose fitting items of clothing and tie back any long hair when working on your tread- mill. PrestigeSports Treadmill Maintenance Guide...
Need help?
Do you have a question about the XM-PRO II and is the answer not in the manual?
Questions and answers
Belt not running console lit up all buttons on handles work
The issue may be caused by the safety key not being properly attached. The manual states that before every use, the safety key should be inspected to ensure it stops the treadmill when pulled away from the display. If the console is lit and the buttons work but the belt does not run, check that the magnetic safety key is correctly in place.
This answer is automatically generated