Table of Contents
Advertisement
COMPASS CALIBRATION
When the compass needs to be calibrated the word "CAL" appears instead of the
Compass Scale. To calibrate you should rotate the device on three axis as illus-
trated.
8
MOUNTING ON A TRIPOD
The BinoX THD is tripod mountable and can be
mounted on tripods with a 1/4" thread mount.
NOTE
After calibrating the device please
remember that the compass will work
best when holding the BinoXTHD
parallel to the ground.
Other possible Errors:
•
(you may need to restart the device or
recalibrate the compass);
•
Strong Magnetic Field (please, move
away from the Magnetic Field);
•
be updated.
ERR — an error was detected
SMF — your device is under
UPD — your firmware needs to
Advertisement
Table of Contents
Need help?
Do you have a question about the binox-thd and is the answer not in the manual?
Questions and answers