AirMedia Presentation Gateway Deployment Guide
The AirMedia application requires firewall rules to allow it to communicate with the AM-100 and AM-101 devices.
Crestron recommends creating a rule for the application that allows all traffic to pass to the device. If the rule does
not exist, the operating system prompts the user to add a rule. This may require administrator privileges.
Refer to the Port Map 1: Ports Used by the Client table for the set of ports that allow the client to communicate
with the device.
Port Map 1: Ports Used by the Client
Port
Type
Direction
80
TCP
Both
389
TCP
Both
443
445
515
TCP
Both
1041
TCP
Outbound
1047
UDP
Inbound
1048
1049
1688
TCP
Both
3268
TCP
Both
8080
TCP
Both
19996
TCP
Both
31865
TCP
Both
10
Function
Open
Projector
Optional
Control
Control
Required
Channel
Video
Required
Control
Required
Channel
Discovery
Optional
Audio
Recommended This port is for the audio data channel.
Control
Required
Channel
Video
Required
Future
Optional
Discovery
Optional
Notes
This port is used to turn on a Crestron Connected
projector. If this port is blocked, the device functions
normally, but the "automatic projector power on"
feature does not work.
For best performance, Crestron recommends that ports
389, 443, and 445 are open. At a minimum, one port
needs to be open for the device to function properly. If
only one port is open and that port is used by another
application, AirMedia will not function properly.
This port is for the video data channel.
If this port is not open, AirMedia does not
function properly.
These ports are used for device discovery. If the port
is closed, AirMedia may not be able to find devices
automatically.
This port is used as part of the screen sharing process.
This port is for the video data channel. If the port is not
open, AirMedia does not function properly.
This port is reserved for future use.
This port is used for device discovery. If this port
is closed, AirMedia may not be able to find devices
automatically.
|
Doc. 7693G
crestron.com
Need help?
Do you have a question about the AM-100 and is the answer not in the manual?
Questions and answers