Table of Contents
Advertisement
CHANGING THE SANDING DISCS
WARNING: TURN THE POWER OFF AND REMOVE THE PLUG FROM THE
OUTLET BEFORE CHANGING THE SANDING DISC.
1. Remove the mitre gauge and work table. See "Mounting The Disc Sander
Table" on page 7.
2. Remove the disc guard screws
and disc guard.
3. Remove the sanding disc from the
disc plate.
• The abrasive discs are attached
to the plate with a pressure-
sensitive adhesive.
4. Make sure that the disc plate is
clean.
• Replacement sanding discs are
available from your Clarke
dealer.
Grit
Fine
Medium
Coarse
NOTE: 'Hook and loop' sanding discs cannot be used with this machine.
5. Remove the paper backing from the new abrasive disc.
6. Align the edge of the abrasive disc with the plate and press the disc into
position, leaving no loose edges.
7. Replace the disc guard, disc guard screws and work table.
NOTE: 'Hook and loop' sanding discs cannot be used with this machine.
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
Part number
6500440
6500441
6500442
12
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the CS48 and is the answer not in the manual?
Questions and answers
My belt sander has been making a very loud screeching sound for sometime. It sounds like dry bearings or something. The machine works fine, but at any minute I'm expecting it to fail. About 4 years old, but hardly used - maybe once a month.
A loud screeching sound in a Clarke CS48 belt sander could be caused by several factors, including:
1. Improper Belt Tracking – If the sanding belt is misaligned, it may rub against the machine’s frame or rollers, creating a screeching noise. Adjust the tracking knob to center the belt properly.
2. Worn or Dirty Bearings – Bearings in the rollers or motor may be worn out or clogged with dust, leading to friction and noise. Cleaning or replacing the bearings may be necessary.
3. Debris Build-Up – Sanding debris can accumulate on the belt, disc, or rollers, causing resistance and noise. Use a stick belt cleaner to remove unwanted material.
4. Loose or Worn Belt – A loose or stretched sanding belt may slip, causing a high-pitched sound. Replace the belt if it is worn or damaged.
5. Motor Issues – If the motor is struggling or has internal wear, it may produce screeching noises. Check for overheating or unusual vibrations.
Regular maintenance, including cleaning and adjusting components, can help prevent these issues.
This answer is automatically generated