Table of Contents
Advertisement
FreeWave Technologies
April 10, 2009
continuous current. The pin #1 of the 10-pin connector on the transceiver is the positive lead; pin
#4 or pin #6 of this connector should be as a negative lead.
Transceiver is designed to operate in negative ground systems only.
LIG0011AA Rev A
Remote Site Products - 1-888-532-2706 - www.remotesiteproducts.com
http://www.remotesiteproducts.com/p-20000-FreeWave-LRS455-CE-Radio-Licensed-Serial-400-MHz-Radio-Enclosed.aspx
400 MHz Licensed Installation Manual
5 of 6
V1.0
Advertisement
Table of Contents
Need help?
Do you have a question about the LRS455 SERIES and is the answer not in the manual?
Questions and answers