Security; Password; Login Options - Igel zero hdx User Manual

10. Security

Setup > Devices > Security
Menu path:
In order to prevent unauthorized access to the thin client setup which could allow deeper penetration into
your network, it is essential that you set up an administrator password following the initial configuration.
 You can also use an additional user password which offers various options for permitting restricted
configuration by users.

10.1. Password

Setup > Devices > Security > Password
Menu path:
 Under Password, set up an administrator password and a user password.
Administrator and user password
By enabling this password, the IGEL setup, shell access to Xterm and access to the console will be
restricted to the administrator. The
password. If the setup is locked by an administrator password single setup pages can be enabled
for the user - see Enable Setup Pages for Use (page 16)r.
Remote user password
Setup user
When you enter a password, ensure that the correct keyboard layout is enabled. After all, you will
only see stars instead of characters when entering the password and will not be able to see why
the password was not accepted.

10.2. Login Options

Setup > Devices > Security > Logon
Menu path:
 Here you can configure the local login procedure for the thin client. You can login via the IGEL
smartcard or via the Kerberos protocol, e.g. in a Windows domain.
IGEL Technology GmbH
Sets passwords for the administrator and user accounts. The
setup will be protected by the administrator password unless
the user has been granted access to specific areas.
Reset to Factory Defaults
Sets a password for the remote session user (SSH).
Allows the user to access the local setup.
IGEL Zero HDX
option may only be used with this
136
5.09.100