Table of Contents
Advertisement
SAFETY PRECAUTION
CAUTION:
The lightning flash with
arrowhead symbol, within
an equilateral triangle, is
intended to alert the user
to "dangerous voltage"
and to prevent from a risk
of electric shock.
WARNING: Do not use this STB where contact with or immersion in water is a possibility. Do
not use near flower vase, washbowls, kitchen sinks, laundry tubs, swimming pools, etc.
WARNING: Do not put the candle or lamp stand on the cabinet; otherwise, there is the danger
of fire.
WARNING: The unit should be connected to a power supply only of the type described in the
operating instructions or as marked on the unit. If you are not sure of the type of power supply
(for example, 120 or
230 V) to your home, consult your local dealer or local power company.
WARNING: This product install diodes. Do not open the cabinet or touch any parts in the inner
mechanism. Consult your local dealer for technical service if the opening is required.
Note: To ensure proper use of this product, please read this User manual carefully and
retain for further reference.
Note: This product install diodes. Do not open the cabinet to avoid the unit direct exposure to
radiation.
Unit Cleaning: After the unit power is turned off, you can clean the cabinet, panel and remote
control with a soft cloth lightly moistened with a mild detergent solution.
Attachments: Never add any attachments and/or equipment without the manufacturer
consent; as such additions may result in the risk of fire, electric shock, or other personal injury.
Locating: Slots and openings in the cabinet are provided for ventilation to protect it from
overheating. Do not block these openings or allow them to be blocked by placing the STB on a
bed, sofa, or other similar surface, nor should it be placed over a radiator or heat register.
Power-Cord Protection: Place the power-supply cord out of the way, where it will not be
walked on. Please take special attentions to cords at plugs, convenience receptacles, and the
point where they exit from the unit.
Warning:
To reduce the risk of
electric shock, don't open
the cabinet. Refer
servicing to qualified
personnel only.
i
The exclamation point
within an equilateral
triangle is intended to alert
the user to important
operating and
maintenance (servicing).
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for BigSAT BS-S 67CR-M
-
Page 1: Safety Precaution
SAFETY PRECAUTION CAUTION: Warning: The exclamation point The lightning flash with To reduce the risk of within an equilateral arrowhead symbol, within electric shock, don't open triangle is intended to alert an equilateral triangle, is the cabinet. Refer the user to important intended to alert the user servicing to qualified operating and... - Page 2 Object and Liquid Entry: Never put objects of any kind into this STB through openings, as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill any liquid on the STB. Note: Moisture may be formed on the lens In the following conditions: when the unit is suddenly moved from a cold environment or an air-condition room to a warm place.
-
Page 3: Table Of Contents
Basic Operations CONTENTS 1. REMOTE CONTROL.......................4 2. FRONT PANEL .......................5 3. REAR PANEL .........................5 4. CONNECTING YOUR SYSTEM..................6 5. CHANNEL ........................7 TV C ....................... 7 HANNEL ANAGER 5.1.1 Group ..................................7 5.1.2 Skip .....................................8 5.1.3 Edit .....................................8 5.1.4 Sort .....................................9 5.1.5 Favorite ..................................9 5.1.6 Find ..................................10... -
Page 4: Remote Control
Basic Operations Remote Control You can power on/off the receiver, operate on screen menu, and use a variety of hot key function. POWER To switch your receiver on from standby or standby to on. MUTE Used to enable or disable the audio MENU Displays the Main Menu on the screen, or return to the previous menu or status... -
Page 5: Front Panel
Basic Operations Front panel POWER: To switch the receiver power on/stand by VOL^, v KEY: To adjust volume level, or to move cursor left or right in the menu CH ^, v KEY : To change channels, or to move cursor up or down in the menu Remote Sensor: Detects infrared signal from remote control unit Display(4-Digit/7-Segment): Indicates operating status of receiver Power Led: Lights up while the receiver is power on... -
Page 6: Connecting Your System
Basic Operations Connecting Your System There are three ways to connect the receiver to your existing TV system. We recommend using one of the following cases for the best result : 1. Connect one end of SCART cable to the TV(SCART) jack on the back of the receiver and the other end to a SCART jack on your TV. -
Page 7: Channel
Menu Operations Channel When you press[Menu]key to enter menu, there will display the picture like below: You can move highlight by press[Channel Up/Channel Down]key and press[OK]key to preview the current highlighted program in the right side preview window. Press[Up/Down]key to select menu pages You can press[Page Up/Page Down]key to among Channel, Installation, System and implement the Page Up/Page Down function. -
Page 8: Skip
Menu Operations 5.1.3.2 Create 5.1.2 Skip If you press[Green] key, it will display create window like below: In “TV Channel Manager” menu, press [Green] key can make a “skip mark” in the right side of the highlighted channel. In “Satellite” item, press[OK] key can After save and exit “TV Channel Manager”... -
Page 9: Sort
Menu Operations 5.1.4 Sort 1 On the “Name” item, press[OK]key can display keypad to edit the name of selected Press [Blue] key can open the “Sort” channel. window like above. There are five kinds of 2 On the “Video PID”, “Audio PID” and “PCR sorting ways. -
Page 10: Find
Menu Operations 1 Press [White]key can open the “Favorite” 5.2 Radio Channel List window like above Basically, the operation of “Radio Channel 2 You can move highlight between 8 favorite Manager” is same as “TV Channel Manager”, groups by press[Channel Up/Channel but there is one point different: In “Radio Down]key and press[OK]key to make a Channel Manager”... -
Page 11: Installation
Menu Operations DiSEqC: You can use[Volume Up/ Volume Installation Down]key to switch options. There are several options for your selection: Disable: without DiSEqC. 1/2, 2/2: two ports DiSEqC 1/4, 2/4, 3/4, 4/4: 4 ports DiSEqC 1/8, 2/8… 8/8: 8 ports DiSEqC 1/16, 2/16….16/16: 16 ports DiSEqC 6.1 Installation When you enter to “Installation”... - Page 12 Menu Operations signal from 22K port. If the item is switched to When you press[Green] key, it will display “Off”, the receiver will receive all signal from 0K “New TP” in “TP Index” item; You should port. set the parameters of “TP Frequency” and ! Notice “Symbol Rate”...
-
Page 13: Ca Setting
Menu Operations channels), scan type (means preset scan, that is searching the existed TP. Automatic Scan means blind scan. It is no need existed TP info) and NIT Search on/off. After you set up, press [OK] key to start scanning. 6.1.11 Multi Search Multi Search can support search the multi satellite one by one as user select. -
Page 14: Language
Menu Operations languages include: English, French, German, 7.1 Language Russian, Arabic, Portuguese, Turkish, When you enter to “Language” menu, you will Spanish, Polish and Italian. see the screen like below: EPG: Press [Left/Right] key can select EPG language. Subtitle Language: Press [Left/Right] key can select subtitle language. -
Page 15: Local Time Setting
Menu Operations RF Channel is use for setting TV frequency range is “-12:00 ~ +12:00”, increase each range, please refer to the table as below: half hour progressively. You can press [Left/Right] to control System Range PAL-BG 21~69(Italian; default Summer time on or off. value) “Date”... -
Page 16: Startup Channel
Menu Operations When you select “Channel” (timer setting for channel change and Wakeup/Sleep) option in “Timer Service”, the screen will display like below: Wakeup Message: press[Volume Up / Volume Down]key to select reminding message as Birthday, Anniversary and General. Wakeup Channel: press[OK]key to Wakeup Date, you can use number enter channel list and select channel key to input your wakeup date. -
Page 17: Channel Play Type
Menu Operations If the setting of “Boot on Channel” is “On”, it means the following two items can be work. If the setting is “Off”, it means the “Boot on Channel” function can’t work. In the “Mode” item, you can set the “Startup Channel”... -
Page 18: Parental Lock
Menu Operations highlight to this item and press[OK]key to “Channel Lock ”is “No”, the Lock function reset parameters as default value. will invalid. Press[Exit]key to draw back from the “OSD New Password is used for revising Setting” menu. password; you can input the new password in this item by using number keys directly. -
Page 19: Tools
Menu Operations Tools 8.2 Satellite Guide When you enter to “Tools” menu, you will see a When you enter to “Satellite Guide” menu, you screen like below: will see the screen like below: In “Tools” menu: “Satellite Guide” is use for user to enter local Press[Volume Up/Volume Down]key to longitude;... -
Page 20: Default Value
Menu Operations Delete All Channel: 8.3 Default Value When you press [OK] key in the “Delete All Default Value: Channel” item, it will pop a dialogue ask you whether confirm to delete all channel. If you select “Yes”, all the channel will be deleted. 8.4 Software Upgrade When you press[OK]key In the “Default Value”... - Page 21 Menu Operations Connect master receiver to slave receiver via serial interface. Enter “Software Upgrade” menu in master receiver and press[Volume Up/Volume Down]keys to switch upgrade mode. Upgrade modes include: code / Program List / user back /video back / radioback / defaultdb / code + program list.
-
Page 22: Game
Menu Operations Moving highlight to[Cancel]keys and Game press [OK]key to draw back from the game. Start on the game: [Volume Up/Volume Down/Channel UP/Channel Down] use these arrow keys to guide the snake. [OK] Pause/Play game [Exit] Quit game and draw back to “Game”... -
Page 23: Trouble Shooting
Trouble Shooting Trouble Shooting If you suspect there is a fault with your receiver, please check the following trouble shooting guide before calling authorized service agent. Warning! Under no circumstances attempt to repair the receiver yourself. Tampering with the receiver may result in fatal electric shock and will invalidate your warranty. -
Page 24: Specifications
Specifications Specifications 11.1 General System standard Fully MPEGII/DVB Compliant Channel Storage Max.4000 TV and Radio Channels Input Frequency 950~2150Mhz RF Input level -65~-25dBm LNB Control DiSEqC1.0/1.2 LNB Power 13V/18V (Max,500mA) LNB tone switch 22KHZ Waveform QPSK(SCPC,MCPC capable) Symbol rate 2~45Mbps 11.2 A/V Mode Video format MPEG-II Main profile/Main level...
Need help?
Do you have a question about the BS-S 67CR-M and is the answer not in the manual?
Questions and answers